AEG FFB72600PM- User Manual

4. CONTROL PANEL 1 2 4 5 6 8 3 7 1 On/off button 2 Program button 3 Programme indicators 4 Display 5 Delay button 6 Option button 7 Indicators 8 Start button 4.1 Indicators Indicator Description Washing phase. It comes on when the washing phase operates. Rinsing phase. It comes on when the rinsing p...

5. PROGRAMMES Programme Degree of soilType of load Programme phases Options 1) • Normal soil• Crockery and cut- lery • Prewash• Wash 50 °C• Rinses• Dry • ExtraHygiene• TimeSaver• XtraDry 2) • All• Crockery, cutlery, pots and pans • Prewash• Wash from 45 °C to 70 °C • Rinses• Dry • ExtraHygiene• Xtra...

5.1 Consumption values Programme 1) Water (l) Energy (kWh) Duration (min) 11.4 0.76 143 7.5 - 12 1.0 - 1.3 99 - 158 12.5 - 14.5 1.4 - 1.7 170 - 190 12 - 14 0.7 - 0.9 82 - 92 10.5 0.9 38 4.0 0.01 14 9.0 - 10 1.1 - 1.3 230 - 250 1) The pressure and the temperature of the water, the variations of the m...

CAUTION! If children have access to the appliance, it is advised to deactivate AirDry as opening the door may pose a danger. How to deactivate AirDry Make sure the appliance is in user mode. 1. Press Delay . • The indicators and are off. • The indicator still flashes. • The display shows the current...

How to activate TimeSaver Press Option until the indicator is on. The display shows the updated programme duration. 7.3 ExtraHygiene This option provides better hygiene results by keeping the temperature at 70 °C for at least 10 minutes during the last rinsing phase. How to activate ExtraHygiene Pre...

Opening the door while the appliance operates Opening the door while a programme is running stops the appliance. It may affect the energy consumption and the programme duration. After closing the door, the appliance continues from the point of interruption. If the door is opened for more than 30 sec...

• Make sure that glasses do not touch other glasses. • Put small items in the cutlery basket. • Put light items in the upper basket. Make sure that the items do not move. • Make sure that the spray arm can move freely before you start a programme. 10.4 Before starting a programme Make sure that:• Th...

4. To engage again the spray arm to the basket, press the spray arm upwards in the direction indicated by the lower arrow and simultaneously turn it counterclockwise until it locks into place. 11.3 External cleaning • Clean the appliance with a moist soft cloth. • Only use neutral detergents. • Do n...

Problem and alarm code Possible solution The appliance trips the cir-cuit-beaker. • The amperage is insufficient to supply simultaneously all the appliances in use. Check the socket amperage andthe capacity of the meter or turn off one of the applian-ces in use. • Internal electrical fault of the ap...

Problem Possible cause and solution The dishes are wet. • For the best drying performance activate the option XtraDry and set AirDry . • The programme does not have a drying phase or has a drying phase with low temperature. • The rinse aid dispenser is empty.• The quality of the rinse aid can be the...

Electrical connection 1) Voltage (V) 200 - 240 Frequency (Hz) 50 / 60 Wattage (W) 1550-2200 Water supply pressure bar (minimum and maximum) 0.5 - 8 kPa (minimum and maximum) 50 - 800 Water supply Cold water min 5 °C Capacity Place settings 14 1) Refer to the rating plate for other values. 14. INSTAL...

If the door does not close correctly, loosen or tighten the adjustable feet to level the appliance. 14.2 Water connection Water inlet hose Connect the inlet hose to a water tap with an external BSP thread spout of 3/4''.For best washing performance it is recommended to connect the appliance to a col...