AEG FFC53610ZM- User Manual

4. CONTROL PANEL 1 2 4 6 8 3 7 5 1 On/off button 2 Program button 3 Programme indicators 4 Display 5 Delay button 6 Option button 7 Indicators 8 Start button 4.1 Indicators Indicator Description Washing phase. It comes on when the washing phase operates. Rinsing phase. It comes on when the rinsing p...

5. PROGRAMMES The order of the programmes in the table may not reflect their sequence on the control panel. Programme Degree of soilType of load Programme phases Options 1) • Normal soil• Crockery and cutlery • Prewash• Wash 50 °C• Rinses• Dry • ExtraHygiene• XtraDry 2) • All• Crockery, cut- lery, p...

Programme 1) Water (l) Energy (kWh) Duration (min) 4 0.1 14 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. 5.2 Information for test institutes To receive the necessary information for conducting perf...

• The indicator still flashes. • The display shows the current setting. – = rinse aid empty notification activated. – = rinse aid empty notification deactivated. 2. Press Start to change the setting. 3. Press on/off to confirm the setting. 6.3 AirDry AirDry improves the drying results with less ener...

Activating options can affect the water and energy consumption as well as the programme duration. 7.1 XtraDry Activate this option to boost the drying performance. With XtraDry on, the duration of some programmes, water consumption and the last rinse temperature can be affected.XtraDry is a permanen...

9. DAILY USE 1. Open the water tap. 2. Press the on/off button to activate the appliance. Make sure that the appliance is in programme selection mode. • If the rinse aid empty message is shown fill the rinse aid dispenser. 3. Load the baskets. 4. Add the detergent. 5. Set and start the correct progr...

Cancelling the delay start while the countdown operates When you cancel the delay start you have to set the programme and options again.Press simultaneously Delay and Option until the appliance is in programme selection mode. Cancelling the programme Press and hold simultaneously Delay and Option un...

• Do not put in the appliance items made of wood, horn, aluminium, pewter and copper. • Do not put in the appliance items that can absorb water (sponges, household cloths). • Remove remaining food from the items. • Make soft the remaining burned food on the items. • Put hollow items (cups, glasses a...

• If you regularly use short duration programmes, these can leave deposits of grease and limescale inside the appliance. To prevent this, we recommend to run long duration programmes at least 2 times per month. • To maintain the performance of your appliance at its best, we recommend to use monthly ...

Problem and alarm code Possible solution The program lasts too long. • If the delayed start option is set, cancel the delay setting or wait for the end of the countdown. Small leak from the appli-ance door. • The appliance is not levelled. Loosen or tighten the ad- justable feet (if applicable). • T...

Refer to "Before first use" , "Daily use" or "Hints and tips" for other possible causes. 13. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 600 / 850 / 625 Electrical connection 1) Voltage (V) 220 - 240 Frequency (Hz) 50 Water supply pressure Min. / max. bar (MP...

damage. You are also entitled to have the Appliance repaired or replaced if the Appliance fails to be of acceptable quality and the failure does not amount to a major failure. ‘Acceptable quality’ and ‘major failure’ have the same meaning as referred to in the ACL. 10. New Zealand: For Appliances an...