Zanussi ZWT71201WA User Manual

Page 2 - General safety

Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7 Drying Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Helpful hints a...

Page 4 - Product description; Detergent dispenser drawer; Control panel

Product description 1 Detergent dispenser drawer 2 Control panel 3 Door opening handle 4 Rating plate 5 Drain pump 6 Adjustable feet 1 2 3 4 5 6 Detergent dispenser drawer Compartment for detergent used for prewash and soak phase or for stain remover used during the stain action phase (if available)...

Page 7 - Washing programmes

Washing programmes Programme Maximum and Minimum Temperature Cycle Description Maximum Spin Speed Maximum Fabrics Load Type of Laundry Options Detergent Compartment Co ttons 1–2–3–4–5 90°- Cold Main wash - Rinses Long spin at maximum speedMax. load 7 kg - Reduced load 3 kg 1) For white and coloured ...

Page 9 - Drying Programmes; Degree of Drying; Helpful hints and tips; Sorting out the laundry

Drying Programmes Degree of Drying Type of Fabric Drying Load Spin Speed Suggested dry- ing time in Mi- nutes Ideal for towelling materials Cotton and linen (bath- robes, bath towels, etc) 4 kg 3 kg 1.5 kg 1200 180 - 200 120 - 130 85 - 95 Suitable for items to put away with- out ironing 1) Cotton an...

Page 10 - Drying Hints; Preparing the drying cycle

Red wine: soak in water and detergent, rinse and treat with acetic or citric acid, then rinse. Treat any residual marks with bleach. Ink: depending on the type of ink, moisten the fabric firstwith acetone 1) , then with acetic acid; treat any residual marks on white fabrics with bleach and then rins...

Page 11 - First use; Acoustic signals

• Also, fabrics containing residue of setting lotions or hair sprays, nail solvents or similar solutions must not be machine dried in order to avoid the formation of harmful vapours. The detergent and any additives must be placed in the ap- propriate compartments of the dispenser drawer before start...

Page 12 - Daily Use

Daily Use Load the laundry Open the door by carefully pulling the door handle outwards. Place the laun- dry in the drum, one item at a time, shaking them out as much as possible. Close the door. Make sure that no laundry stays between the seal and the door. There is a risk of water leakage or damage...

Page 15 - Fluff in the garments; Care and cleaning; Descaling

6. At the end of the programme turn the selector dial to the position to switch the machine off and re- move the laundry. Fluff in the garments During the WASHING AND/OR DRYING PHASE, certain types of fabric, as sponge-cloth, wool, sweatshirt, could release fluff. The released fluff could stick to t...

Page 17 - What to do if...

• Screw the hose back onto the tap. Make sure the connection is tight. • Unscrew the hose from the machine. Keep a rag nearby because some water may flow. • Clean the filter in the valve with a stiff brush or with the piece of cloth. 35° 45° • Screw the hose back to the machine and make sure the con...

Page 21 - Technical data; Programme

If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information. Mod. ... ... ... Pr od. No. ... ... ... Ser . No. ... ... ... Mod . . .. .....

Page 22 - Installation; Unpacking

Installation Unpacking All transit bolts and packing must be removed before us- ing the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. After removing all the packaging, carefully lay machine on it's back to re- mov...

Page 24 - Building in

If your drain hose looks like this (see beside) you do not require the “U” piece”. Just push the hose firmly in to the standpipe. 2. Onto a sink outlet spigot. Loop If the outlet spigot has not been used before, remove any blanking plug that may be in place. Push the drain hose onto the spigot and s...

Page 26 - Front view; Top view

D 46 8 Caution! Do not remove the screw 8! d) Counter-magnet (6) The appliance is prearranged for a magnetic closure of the door. To enable a correct operation of this device, it is neces- sary to screw the counter-magnet (6) (steel disk + rub- ber ring) into the inner side of the door. Its position...

Page 27 - Hardwood strip; Electrical connection

Drill four fixing holes see Fig. G Position the base into the recess with its front edge as far forward as the adjoining plinth line will allow. The reason for placing the base in this position is to al- low a small strip of beading to be fitted in front of the appliance feet.Graphic H 600-605 490 5...