Stamina 55-4700 - Manual - manualsarea.com

Page 3 - THANK YOU FOR PURCHASING THE; AeroPilates Premier Studio; AeroPilates Premier Studio at the factory with the exception; CALL US FIRST

THANK YOU FOR PURCHASING THE AeroPilates Premier Studio To help you get started, we have pre-assembled most of your AeroPilates Premier Studio at the factory with the exception of those few parts left unassembled for shipping purposes. Simply follow the few assembly instructions set forth in this ma...

Page 4 - BEFORE YOU BEGIN; Thank you for choosing the

4 BEFORE YOU BEGIN Thank you for choosing the AeroPilates Premier Studio. We take great pride in producing this quality product and hope it will provide many hours of qualityexercise to make you feel better, look better and enjoylife to its fullest. Yes, it's a proven fact that a regular exercisepro...

Page 5 - EQUIPMENT WARNING & NOTICE LABELS; AeroPilates Premier Studio.; Label is larger than actual size

5 EQUIPMENT WARNING & NOTICE LABELS This chart is provided to help identify the warning & notice labels on the AeroPilates Premier Studio. Please take a moment to familiarize yourself with all of the warning & notice labels. Label is larger than actual size WARNING LABEL(61) W1

Page 6 - H A RDWA R E I D E N T I F I C AT I O N C H A RT; INCHES; Rubber Foot; Part No. and Description

6 H A RDWA R E I D E N T I F I C AT I O N C H A RT This chart is provided to help identify the hardware used in the assembly process. Place the washers, theend of the bolts, or screws on the circles to check for the correct diameter. Use the small scale to check thelength of the bolts and screws. NO...

Page 7 - ASSEMBLY INSTRUCTIONS; CONNECTION; FRONT

7 ASSEMBLY INSTRUCTIONS Place all parts from the box in a cleared area and position them on the floor in front of you. Remove allpacking materials from your area and place them back into the box. Do not dispose of the packing materialsuntil assembly is completed. Read each step carefully before begi...

Page 8 - MAIN FRAME ASSEMBLY

8 ASSEMBLY INSTRUCTIONS STEP 2 Remove your AeroPilates Premier Studio from its packaging placing the product on its side, with the LOCKING PIN(29) side upward. Remove the LOCKING PIN(29) and unfold the MAIN FRAME ASSEMBLY separating the half that has the attached LOCKING PIN(29). When completed, the...

Page 9 - REAR

STEP 6: Make sure that the threaded holes in the FOOTBAR(5) are facing toward the end of the AeroPilates Premier Studio as shown in the illustration. Insert the FOOTBAR(5) into the mounting holes located in the FRONT COVER(3) and FRONT FRAME(1). Insert the FOOTBAR(5) all the way to the bottom and lo...

Page 10 - HAND; AeroPilates; Premier Studio

ASSEMBLY INSTRUCTIONS 10 (53) Front Stand ( Wider ) (55) Rear Stand ( Narrower ) Slots STEP 9 Insert the FOAM PAD ASSEMBLIES(16) into the holes located on the CARRIAGE(7). Place the HAND STRAPS(20) onto the FOAM PAD ASSEMBLIES(16) for storage. STEP 10 Refer to the inset drawing. To prevent the CARRI...

Page 11 - Always ensure that the; ROPE LENGTH ADJUSTMENT; PLASTIC SNAP HOOKS; HEADREST ADJUSTMENT

11 OPERATIONAL INSTRUCTIONS Over time your TENSION CORDS(10) will relax. To increase resistance in the TENSION CORDS(10), stretch and re-tie the tension cords in a more tautposition. B C SupportBracket LOAD ADJUSTMENT The resistance of the CARRIAGE(7) can be adjusted by securing the TENSION CORDS(10...

Page 12 - MAINTENANCE; CARDIO; OPERATIONAL INSTRUCTIONS; STORAGE

MAINTENANCE The safety and integrity designed into the AeroPilates Premier Studio can only be maintained when the AeroPilates Premier Studio is regularly examined for damage and wear. Special attention should be given to the following: It is the sole responsibility of the user/owner to ensure that r...

Page 13 - CONDITIONING GUIDELINES; Have your doctor review your training and diet programs.

13 CONDITIONING GUIDELINES How you begin your exercise program depends on your physical condition. If you have been inactive forseveral years or are severely overweight, start slowly and increase your workout time gradually. Increaseyour workout intensity gradually, too, by monitoring your heart rat...

Page 14 - gently; pull the upper

14 WARM-UP and COOL-DOWN Warm-Up The purpose of warming up is to prepare your body for exercise and to minimize injuries. Warm up for two to five minutes before strength-training or aerobic exercising. Perform activities that raise yourheart rate and warm the working muscles. Activities may include ...

Page 15 - THIS WARRANTY SHALL NOT; or call us at; IF ANY PART OF THE PRODUCT IS NOT IN COMPLIANCE WITH THIS LIMITED; In the event that the purchaser makes any claim under this; SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY PRODUCT, LOSS OF; WARRANTY

Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanshipunder normal use, service and proper operation for a period of 90 days on the parts and three years on theframe from the date of the original purchase from an authorized retailer. THIS WARRANTY SH...

Page 16 - PRODUCT PARTS DRAWING

Page 17 - PARTS LIST; PART NAME

17 PARTS LIST DIAGRAM# PART NAME QTY 1 Front Frame 1 2 Rear Frame 1 3 Front Cover 1 4 Rear Cover 1 5 Footbar 1 6 Foam Sleeve 1 7 Carriage 1 8 Roller 4 9 Roller Spacer 4 10 Tension Cord 4 11 Support Bushing 4 12 Stop Bushing 4 13 Cushion 1 14 Headrest 1 15 Foam Pad Tube 2 16 Foam Pad 2 17 Foam Cap 2 ...

Page 19 - FAX/MAIL ORDERING FORM; Our Customer Service; DESCRIPTION

IMPORTANT : Before filling out the form below make sure you have the right information. Refer to the parts list to make sure you're ordering the right parts! Detach and Mail or Fax the Form Below Stamina Products, Inc. P.O. Box 1071 Springfield, MO 65801-1071 IMPORTANT : We must have your phone numb...

Stamina 55-4700 - Manual

Table of Contents:

Summary

Other Stamina Models