Stamina 20-1200 - Manual - manualsarea.com

Page 3 - CALL US FIRST

THANK YOU FOR PURCHASING THE Studio Tower To help you get started, we have pre-assembled most of your Studio Tower at the factory with the exception of those few parts left unassembled for shipping purposes. Simply follow the few assembly instructions set forth in this manual. With regular workouts ...

Page 4 - BEFORE YOU BEGIN; THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBLY :; Thank you for choosing the; Studio; please

4 BEFORE YOU BEGIN 4 Locking Pin Top Beam Push-Thru Bar Left Upright Wooden Barre Right Upright Extension Cushion Right Slider Spring Pin Locking Knob Wheel Cap Base Frame Outer Cover Main Frame Round Stand THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBLY : Allen Wrench (6mm) Combination Wrench Thank y...

Page 5 - EQUIPMENT WARNING & NOTICE LABELS; Please take a; Label is larger than actual size

5 EQUIPMENT WARNING & NOTICE LABELS This chart is provided to help identify the warning & notice labels on the Studio Tower . Please take a moment to familiarize yourself with all of the warning & notice labels. Label is larger than actual size WARNING LABEL(63) W1

Page 6 - H A RDWA R E I D E N T I F I C AT I O N C H A RT; INCHES

6 Part No. and Description Qty 56 Nylock Nut (M8 x 1.25) 8 59 Washer (M8) 12 61 Arc Washer (M8) 4 47 Bolt, Button Head (M8 x 1.25 x 50mm) 2 48 Bolt, Button Head (M8 x 1.25 x 55mm) 2 49 Bolt, Button Head (M8 x 1.25 x 60mm) 4 50 Bolt, Button Head (M8 x 1.25 x 70mm) 4 45 Screw, Round Head (M4 x 20mm) 4...

Page 7 - ASSEMBLY INSTRUCTIONS; BUTTON; Note the correct position of the loops on the; LEFT; Loop

ASSEMBLY INSTRUCTIONS 7 Place all parts from the box in a cleared area and position them on the floor in front of you. Remove allpacking materials from your area and place them back into the box. Do not dispose of the packing materialsuntil assembly is completed. Read each step carefully before begi...

Page 9 - BUTTON HEAD BOLTS

ASSEMBLY INSTRUCTIONS 9 STEP 7 Refer to illustration step 7. Place the MAIN FRAME(1) with the cushion side face down. Attach the EXTENSION FRAME(5) to the MAIN FRAME(1) with BUTTON HEAD BOLTS(M8x1.25x55mm)(48), WASHERS(M8)(59), and NYLOCK NUTS(M8x1.25)(56). STEP 8 Refer to illustration step 8. Unfol...

Page 11 - OPERATIONAL INSTRUCTIONS; SECURING STRAP; Button

OPERATIONAL INSTRUCTIONS 11 Attach the PUSH-THRU BAR(26) to one of the adjustment holes in the UPRIGHTS(7, 9) with two LOCKING PINS(30). Attach the SECURING STRAP(32) to the EYEBOLT(23) on the top of the TOP BEAM(22). For some exercises, the PUSH-THRU BAR(26) should be up and secured in position wit...

Page 12 - DOUBLE ENDED; TO USE THE ACCESSORIES:; SAFETY

PUSH-THRU BAR(26) When doing exercises that require the spring resistance to come from above the bar, attach the PUSH- THRU SPRING(34) to the loop on the upper side of the PUSH-THRU BAR(26) with the DOUBLE ENDED CLIP(38). Attach the other end of the PUSH-THRU SPRING(34) to one of the loops on the TO...

Page 13 - ARM SPRINGS

OPERATIONAL INSTRUCTIONS SAFETY STRAP(37) Refer to the illustration. The SAFETY STRAP(37) must be used as follows:When using the PUSH-THRU BAR(26) with the PUSH-THRU SPRING(34) attached from below for bottom load exercises, attach the SAFETY STRAP(37) to another side of the tower from the spring. Co...

Page 15 - LIMITED WARRANTY; WARRANTY; THIS WARRANTY SHALL; or call us at; IF ANY PART OF THE PRODUCT IS NOT IN COMPLIANCE WITH THIS LIMITED; In the event that the purchaser makes any claim under this; SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY PRODUCT, LOSS OF

LIMITED WARRANTY MODEL 20-1200 WARRANTY 15 Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanshipunder normal use, service and proper operation for a period of 90 days on parts and upholstery and 5 yearson the frame from the date of the original purc...

Page 16 - PRODUCT PARTS DRAWING; BACK

Page 18 - Warning Label

PARTS LIST DIAGRAM# PART NAME QTY 48 Bolt, Button Head (M8 x 1.25 x 55mm) 2 49 Bolt, Button Head (M8 x 1.25 x 60mm) 4 50 Bolt, Button Head (M8 x 1.25 x 70mm) 4 51 Bolt, Hex Head (M6 x 1 x 20mm) 11 52 Bolt, Hex Head (M6 x 1 x 55mm) 4 53 Bolt, Flat Head (M6 x 1 x 15mm) 4 54 Acorn Nut (M6 x 1) 9 55 Aco...

Page 19 - FAX/MAIL ORDERING FORM; Our Customer Service; DESCRIPTION

IMPORTANT : Before filling out the form below make sure you have the right information. Refer to the parts list to make sure you're ordering the right parts! Detach and Mail or Fax the Form Below Stamina Products, Inc. P.O. Box 1071 Springfield, MO 65801-1071 IMPORTANT : We must have your phone numb...

Stamina 20-1200 - Manual

Table of Contents:

Summary

Other Stamina Models