Stamina 15-4550 - Manual

EQUIPMENT WARNING & NOTICE LABELS This chart is provided to help identify the warning & notice labels on the Magnetic Fusion 4550 Bike. Please take a moment to familiarize yourself with all of the warning & notice labels. Label is larger than actual size WARNING LABEL(89) W1 5

H A RDWA R E I D E N T I F I C AT I O N C H A RT This chart is provided to help identify the hardware used in the assembly process. Place the washers or theends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to check thelength of the bolts and screws. NO...

ASSEMBLY INSTRUCTIONS 7 STEP 1 Attach the FRONT STABILIZER(2), the short one with the WHEELS(52), to the front of the FRONT FRAME(1) with CARRIAGE BOLTS(M8x1.25x75mm)(57), ARC WASHERS(M8)(77), LOCK WASHERS(M8)(80), and ACORN NUTS(M8x1.25)(75). Place all parts from the box in a cleared area and posit...

ASSEMBLY INSTRUCTIONS 8 STEP 4 Refer to illustration A. Attach the HANDRAIL(6) to the SEAT FRAME(5) with CARRIAGE BOLTS (M8x1.25x45mm)(56), ARC WASHERS(M8)(77), LOCK WASHERS(M8)(80), and ACORN NUTS(M8x1.25) (75). STEP 5 Refer to illustration B. Slide the SEAT FRAME(5) onto the REAR FRAME(3) and lock...

ASSEMBLY INSTRUCTIONS 9 STEP 6 Refer to the inset drawing. Plug the PULSE COIL WIRE(42) into the SOCKET of the PULSE EXTENSION WIRE(40) located on the REAR FRAME(3). Clip the GROMMET PLUGS(43) onto both ends of the PULSE COIL WIRE(42). Connect both ends of the PULSE COIL WIRE(42) to the PULSE SENSOR...

ASSEMBLY INSTRUCTIONS 10 STEP 8 NOTE: The RIGHT PEDAL(37) has R stamped on the end of the pedal shaft. The RIGHT PEDAL(37) has right hand threads and is tightened by turning clockwise. The LEFT PEDAL(35) has L stamped on the end of the pedal shaft. The LEFT PEDAL(35) has left hand threads and is tig...

ASSEMBLY INSTRUCTIONS 11 STEP 9 Run the EXTENSION WIRE on the COMPUTER(27) through the COMPUTER POST(26). Attach the COMPUTER(27) to the COMPUTER POST(26) with ROUND HEAD SCREWS(M5x0.8x12mm)(64). STEP 10 Plug the MOTOR CONTROL WIRE(28) and PULSE PLUG WIRE(39) to the EXTENSION WIRE on the COMPUTER(27...

12 SET UP INSTRUCTIONS Place the Magnetic Fusion 4550 Bike in the area where it will be used. It is recommended that the Magnetic Fusion 4550 Bike be placed on an equipment mat. The Magnetic Fusion 4550 Bike is approximately 57 3/4 inches long x 24 3/8 inches wide x 45 1/8 inches tall (max.). (These...

OPERATIONAL INSTRUCTIONS SEAT ADJUSTMENT LOAD ADJUSTMENT CAUTION: 1.2. Rotate the ADJUSTMENT KNOB(50) counterclockwise until the pin releases when the knob is pulled. Pull the ADJUSTMENT KNOB(50) and slide the SEAT FRAME(5) up or down to desired position. Lock the SEAT FRAME(5) in position by insert...

COMPUTER INSTRUCTIONS Your Magnetic Fusion 4550 Bike utilizes a magnetic braking system to create resistance for your workout. You control the amount and pattern of this resistance by means of the advanced computer console mountedat the center of the handlebar. We recommend that you use this compute...

15 COMPUTER INSTRUCTIONS PROGRAM NUMBER HEART RATE CONTROL PROGRAMS CALORIE / WATT AGE / TARGET H.R. HEART SYMBOL PROGRAM PROFILE SPEED / RPM TIME HEART RATE DISTANCE LCD DISPLAY INSTRUCTIONS Displays programs for selection during setup, from P1 to P12. Displays the selectedprogram during exercise. ...

16 COMPUTER INSTRUCTIONS PROGRAM DESCRIPTIONS (P1) MANUAL PRESET PROGRAMS: P2 to P10 are preset automatic programs. The profiles are shown on the face of the computer. Use the " " button to increase the load level of the program. Use the " " button to decrease the load level of the p...

COMPUTER INSTRUCTIONS 17 (P11) 60% MAX H.R. (P12) 85% MAX H.R. STEP 1: POWER ON Pedaling or press any button. COMPUTER OPERATION STEP 2 : SELECT PROGRAM Press the " / " buttons until the desired program is displayed. STEP 3: SET THE PROGRAM TIME (AND INPUT AGE FOR HEART RATE CONTROL PROGRAMS...

18 COMPUTER INSTRUCTIONS POWER SOURCE: The computer uses the ADAPTER(88) as a power source. Use the Magnetic Fusion 4550 Bike with the adapter plugged into an electrical outlet. STORAGE 1.2. 3. To store the Magnetic Fusion 4550 Bike, simply keep it in a clean dry place. Adjust the SEAT FRAME(5) to t...

CONDITIONING GUIDELINES How you begin your exercise program depends on your physical condition. If you have been inactive forseveral years or are severely overweight, start slowly and increase your workout time gradually. Increaseyour workout intensity gradually by monitoring your heart rate while y...

WARM-UP and COOL-DOWN Warm-Up The purpose of warming up is to prepare your body for exercise and to minimize injuries. Warm up for two to five minutes before strength training or aerobic exercising. Perform activities that raiseyour heart rate and warm the working muscles. Activities may include bri...

WARRANTY LIMITED WARRANTY MODEL 15-4550 Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanshipunder normal use, service and proper operation for a period of 90 days on the parts and three years on theframe from the date of the original purchase from ...

IMPORTANT : Before filling out the form below make sure you have the right information. Refer to the parts list to make sure you're ordering the right parts! Detach and Mail or Fax the Form Below Stamina Products, Inc. P.O. Box 1071 Springfield, MO 65801-1071 IMPORTANT : We must have your phone numb...