Smeg SHW900B Range Hood – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
1
2
3
4
5
6
7
8
9
10
11
12
Table of Contents:
Page 2 – INDEX; EN
Page 3 – RECOMMENDATIONS AND SUGGESTIONS; INSTALLATION; USE; MAINTENANCE
Page 4 – CHARACTERISTICS
Page 5 – Dimensions
Page 6 – Wall drilling and bracket fixing
Page 7 – Mounting the hood body; Connections; DUCTED VERSION AIR EXHAUST SYSTEM
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 - INDEX; EN
2 2 INDEX RECOMMENDATIONS AND SUGGESTIONS ..................................................................................................................... 3 CHARACTERISTICS .............................................................................................................................
Page 3 - RECOMMENDATIONS AND SUGGESTIONS; INSTALLATION; USE; MAINTENANCE
EN 3 3 RECOMMENDATIONS AND SUGGESTIONS The Instructions for Use apply to several versions of this appliance. Accordingly, you may find descriptions of individual features that do not apply to your specific appliance. INSTALLATION • The manufacturer will not be held liable for any damages resulting f...
EN 6 6 7.3 11 12a 320 X 116 1÷2 116 650 min. 7.2.1 INSTALLATION Wall drilling and bracket fixing Wall marking: • Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the centre of the area in which the hood will be installed. • Draw a horizontal line at 650 mm a...
Page 7 - Mounting the hood body; Connections; DUCTED VERSION AIR EXHAUST SYSTEM
EN 7 7 Mounting the hood body • Before attaching the hood body, tighten the two screws Vr lo- cated on the hood body mounting points. • Hook the hood body onto the screws 12a . • Fully tighten support screws 12a . • Adjust screws Vr to level the hood body. • If necessary, it is possible to fasten th...
EN 8 8 ELECTRICAL CONNECTION • Connect the hood to the mains through a two-pole switch hav- ing a contact gap of at least 3 mm. • Remove the grease filters (see paragraph Maintenance) being sure that the connector of the feeding cable is correctly inserted in the socket placed on the side of the fan...
Page 9 - Control panel; Button Function
EN 9 9 USE Control panel T1 T2 T3 T4 L Button Function T1 Turns the Motor off. - T2 Turns the motor on at speed one Buttons T1 + T2 are on. T3 Turns the Motor on at speed two Buttons T1 + T3 are on. Press and hold for 2 seconds to enable shutdown with a 30 minute delay (Mo-tor+Lights). It is possibl...
EN 1 10 MAINTENANCE Grease filters CLEANING METAL SELF- SUPPORTING GREASE FILTERS • The filters must be cleaned every 2 months of operation, or more frequently for particularly heavy usage, and can be washed in a dishwasher. • Remove the filters one at a time by pushing them towards the back of the ...