Smart 2000i - Manual
Smart 2000i – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Contents
- Page 5 – Projector Replacement Guide for the 2000i; Replacing the Projector in a 2000i; Rear; To remove the original projector; Shut down the computer, and then press and hold the; Projector Standby; button on the; Toggle the projector’s power switch to the off position.; secures the projector to the projector plate.
- Page 6 – CAUTION; Be
- Page 9 – Align the projected image as described in the next section.
- Page 10 – Aligning the Projected Image; To adjust image roll
- Page 11 – To adjust the image laterally
- Page 12 – To change the image size; NOTE
- Page 13 – Slide the projector backward or forward to alter the image size.
- Page 14 – To move the image up or down; right side of the Electronics Tray.; Remove the plastic cap to reveal an access hole.
- Page 15 – Customer Support; Rear Projection; Contacting SMART Technical Support; Main switchboard; 1th Avenue SW; Product Warranty; Warranty Shipping Charges
99-00496-00 Rev A0
Interactive Whiteboard
Projector Replacement Guide
for Projector Replacement Kits
NEC MT1060R (03-00043) and NEC MT860R (03-00041)
2000i
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
99-00496-00 Rev A0 Contents Replacing the Projector in a 2000i ................................................... 1Aligning the Projected Image ........................................................... 6Customer Support........................................................................... 11...
99-00496-00 REV A0 Projector Replacement Guide for the 2000i 1 Replacing the Projector in a 2000i Use these instructions to install a replacement NEC MT860 or NEC MT1060 projector in your Rear Projection SMART Board 2000i interactive whiteboard. To remove the original projector 1. Shut down the comp...
2 Projector Replacement Guide for the 2000i 99-00496-00 REV A0 5. With another person supporting the projector, reach through the view port and remove the three nuts (including the steel and nylon washers) that secure the projector in place and thenremove the projector. Use the provided 7/16" nu...
