SIIG TV Mount - Manual
SIIG TV Mount – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Maintenance; Concrete/Brick Wall Installation; Step 2: Display Plate Installation; Check the mounting screws every two months for tightness.
- Page 3 – Technical Support and Warranty
- Page 4 – SIIG products offer comprehensive user; Product Name
A
B
C
D
E
F
G
1
2
3
4
04-0525A
(x4) bolt
(x4) concrete
anchor
(x4) small
washer
(x4) large
washer
(x4) M4X12
screw
(x4) M5X12
screw
(x4) M6X12 screw
Fixed LCD TV/Monitor Mount - 10" to 24"
Attach the wall plate to the wall again and insert the bolts (A) and large washers
(D) into the holes (figure 1-b) and tighten.
Wood Stud Installation
Step 1: Wall Plate Installation
Installation Instructions
Use a high-quality electronic stud finder (commercially available) to locate dead
center of two studs and mark their locations with a pencil (figure 1-a).
Hold the wall plate to the wall and mark four locations to be used for mounting the
wall plate.
Take down the plate and drill four holes at the position you've marked.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 2 3 1 2 1 IMPORTANT: If you don't understand the installation instructions, please consult aninstallation specialist Maintenance Place your TV screen down on a soft, flat surface, and locate the threadedmounting points that are located on the back of the display. According to the size of the displ...
SIIG offers a 5-year manufacturer warranty with this product. Please see our web site formore warranty details. If you encounter any problems with this product, please follow theprocedures below. • Clearly write your RMA number on the top of the returned package. SIIG will refuse toaccept any shippi...
November, 2008 Copyright © 2008 by SIIG, Inc. All rights reserved. Founded in 1985, SIIG, Inc. is a leading computer upgrade manufacturer of I/O connectivityproducts, including PCI & ISA serial and parallel ports, USB, Serial ATA & UltraATAcontrollers, FireWire (1394a/b), networking, sound c...
