SIIG RS-422 - Manual
SIIG RS-422 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Package Contents; USB cable; Layout
- Page 3 – Driver Installation; Windows VistaTM
- Page 4 – To Verify Installation
- Page 5 – Blank Page
- Page 7 – Technical Support and Warranty; Online Support
- Page 8 – features, and are backed by an extensive manufacturer warranty.
1
Introducing the
USB to RS-422/485
converter
The
USB to RS- 422/485 Converter
enables you to choose
between RS-422 and RS-485 formats for each port
depending on the application you need.
Features and Benefits
•
Compliant : USB 1.0 , 1.1 , 2.0
•
Connector : USB type A
•
RS-422 : RxD+ , RxD- ,TxD+ , TxD-
•
RS-485 : Data+ , Data-
System Requirements
•
Pentium
®
II or equivalent PC with an available USB
port
•
Windows
®
2000 / XP (32-/64-bit) / Server 2003
(32-/64-bit) / Vista (32-/64-bit)
Serial Number Sticker
For future product return or exchange, this serial number
is require. Please keep it for your reference.
0 4 - 0 4 8 4 A
USB to RS-422/485 Converter
Quick Installation Guide
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 R S 4 2 2 / 4 8 5 Signal to Target Device U S B port L E D Dip switch Figure 1: Layout Package Contents • USB to RS-422/485 Converter • USB cable • Quick Installation Guide Layout
3 Driver Installation This section provides information on how to install the USB to RS-422/485 drivers. Windows 2000/XP/Server 2003 1. Insert the driver CD after Windows boots. 2. AutoRun should start the installation. If AutoRun doesn’t start, click Start , Run , Type D:\setup.exe , then click OK ...
4 6. Click Install, Install , then click OK . 7. Click Finish . Restart your system to complete the installation. 8. Insert the USB ro RS-485/422 i nto a USB port. The driver will install automatically. To Verify Installation 1. Check Device Manger to verify installation.For 2000/XP/Server 2003: Rig...
