SIIG RS-232 - Manual
SIIG RS-232 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Antenna Connector; The connector is a standard Reverse SMA jack. Simply; Figure 3
- Page 4 – Config Tool; Hardware Installation; RS-232 to Bluetooth Converter; Connect; to Bluetooth Converter
- Page 5 – BT RS232 Config Tool Installation & Setup; config tool; Bluetooth Converter; Tool Installation; BT
- Page 6 – SB-232 Config Tool Parameters Configuration; Tool
- Page 9 – Apply; Click; Write; , to save all parameters after configuring into; Read
- Page 11 – Technical Support and Warranty; Online Support
- Page 12 – features, and are backed by an extensive manufacturer warranty.
1
Introducing the
RS-232 to Bluetooth
The
RS-232 to Bluetooth converter
allows any device with
an RS-232 port to communicate wirelessly.
Features and Benefits
•
Replaces RS-232 cable
•
Full Bluetooth 2.0 support + EDR
•
Easy to configure baud rate and master or slave role
selectable
•
Supports baud rates up to 115.2 K bps
•
300 feet ( Enhanced Antenna ); CLASS 1
System Requirements
•
Pentium II or equivalent PC
•
Windows 2000 and above
Package Contents
•
RS-232 to Bluetooth Converter
with Antenna
•
Power adapter (5V, 500mA)
•
Software CD
•
Quick Installation Guide
Serial Number Sticker
For future product return or exchange, this serial number
is required. Please keep if for your reference.
0 4 - 0 4 8 5 A
RS-232 to Bluetooth
Quick Installation Guide
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 Figure 2 Antenna Connector The connector is a standard Reverse SMA jack. Simply connect it to a 2.0dBi, 50 Ohms impedance dipole antenna to support 2.4 GHz frequency. (The Antenna is changeable for high gain Antenna), see Figure 2. RS-232 (Serial) Connect the RS-232 port into the device as you wou...
4 The purpose of the Set-up Button is for synchronizing between RS-232 to Bluetooth Converter and BT RS232 Config Tool software. Hardware Installation 1. Connect the RS-232 to Bluetooth Converter to serial port of the PC. Connect the DC power adapter and jack into power outlet and DC-in outlet. You ...
5 BT RS232 Config Tool Installation & Setup When setting up RS-232 to Bluetooth Converter for the first time, you have to install and run BT1.exe as BT RS232 config tool first in your computer device. The utility CD is enclosed in the device box. Before you use RS-232 to Bluetooth Converter , yo...
