SIIG PCI 4S - Manual
SIIG PCI 4S – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Package Contents; CyberPro PCI 4S board; Layout; * Note: Make this connection only when two or
- Page 3 – Hardware Installation
- Page 4 – Driver Installation; CyberPro PCI 4S drivers.; Copying Files dialog box appears, type in
- Page 5 – Windows ME; CyberPro 4S PCI board and PCI Function should
- Page 6 – To Verify Windows NT 4.0 Installation
- Page 7 – Windows XP; Continue Anyway, then Finish. Our driver has been; Continue Anyway, then Finish. Our driver has been
- Page 8 – CyberPro 4S PCI board should be displayed.; Changing COM Port Address; CyberSerial PCI serial port you want to change.
- Page 9 – Technical Support and Warranty; Q U E S T I O N S ? S I I G ’ s O n l i n e S u p p o r t h a s a n s w e r s !
1
CyberPro PCI 4S
Quick Installation Guide
0 4 - 0 3 4 3 B
Introducing the CyberPro PCI 4S
The CyberPro PCI 4S high-speed serial I/O card provides
four additional 9-pin serial ports. Depending on the
model purchased, this board will fit into either a Full or
Low Profile chassis.
Features and Benefits
•
Conforms to PCI v2.2 Plug and Play
•
Full support for Windows-based software
•
R e d u c e s C P U l o a d a n d i m p r o v e s s y s t e m
performance dramatically
•
IRQ sharing feature reduces IRQ conflicts
•
High-speed serial port (9-pin) works with 56K V.90
external modems, ISDN terminal adapters, PDAs,
digital cameras, label printers and other serial port
devices
•
Built-in FIFO buffers dramatically increase data
transmit/receive speed, especially under Windows'
multitasking environment
•
Each serial port can be configured for either 5V or
12V output, for serial devices that require power
System Requirements
•
Pentium or equivalent computer with an available
PCI slot
•
Windows 95/98/98SE/ME/NT 4.0/2000/XP/
Server 2003
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Package Contents • CyberPro PCI 4S board • 4-port fan-out cable • Low profile bracket (Dual Profile board only) • Driver CD • Quick installation guide Layout Full profile bracket 4-pin power connector (optional)* J P 1 (S1) J P 4 (S4) J P 2 (S2) J P 3 (S3) 44-pin connector Figure 1. Layout * Note:...
3 Fan-out Cable 44-pin connector Serial ports DB9 (9-pin) Figure 2. Fan-out cable Hardware Installation General instructions for installing the card are provided below, since the design of computer cases and motherboards vary. Refer to your computer’s reference manual for further information, if nee...
4 5. Change JP1-JP4 jumper settings to the desired voltage only if your serial device(s) needs additional power from the serial port. However, most serial devices do not require additional power. For more information, see Figure 1 on page 2. Skip this step if power is not required. 6. To install the...
