SIIG 701P48438 - Manual
SIIG 701P48438 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – System Requirements
- Page 3 – Power Connector; Package Contents
- Page 4 – FireWire
- Page 5 – Hardware Installation; Board Layout
- Page 6 – Windows Driver Installation; USB 2.0 Driver Installation
- Page 7 – FireWire 800 Driver Installation
- Page 10 – Windows VistaTM; Speed USB Combo
- Page 11 – To Verify Windows Installation; For Windows Vista
- Page 12 – Mac OS Driver Installation; USB Driver Installation
- Page 13 – FireWire Driver Installation; USB Combo; Search
- Page 14 – To Verify Mac OS Installation; Connecting Devices; USB Devices
- Page 17 – Blank Page
- Page 19 – Technical Support and Warranty; Online Support
1
FireWire 800 + Hi-Speed
USB Combo
Quick Installation Guide
04-0447B
Introducing the
FireWire 800 + Hi-Speed
USB Combo
The
FireWire 800+Hi-Speed USB Combo
features the latest
technology in FireWire 800 and USB 2.0.
Features and Benefits
•
Combo card design adds five USB 2.0 (480 Mbps),
one 1394a (400Mbps) and two 1394b (800 Mbps)
ports into your system.
•
Built-in 4-pin power connector provides extra power
when connected to the system's power supply
(Recommended)
•
Supports hot-swapping and Plug-n-Play connection
of peripheral devices
FireWire 800 (1394b) interface
•
Provides 3 FireWire ports for multiple 1394b and
1394a device connections
•
Adds two FireWire 800 (1394b) ports (1 int. + 1 ext.)
and one external 1394a (400Mbps) port
•
Supports IEEE 1394b and backwards compatible
with 1394a-2000 and 1394-1995 standards
•
Supports data transfer rates of 100, 200, 400, and
800Mbps
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 USB 2.0 interface • Adds two external and three internal USB 2.0 ports (two internal via USB Pin-out Header, see page 4) • Compliant with USB specification rev. 2.0 • Supports high-speed (480 Mbps), full-speed (12 Mbps), and low-speed (1.5 Mbps) data transfer modes for simultaneous operation of mu...
3 Figure 1. Board Layout Power Connector (recommended) USB 2.0 USB 2.0 1394b (9-pin) 1394b (9-pin) Note: The Power Connector (same as the one used with your floppy disk drive) is designed to provide additional power to the board when needed. Connect this power connector (recommended) when one of the...
4 USB Pin-out Header The internal USB Pin-out Header consists of 9 pins arranged in 2 rows; the header provides 2 USB ports. Match up +5VDC (Pin 1) on the 4-Pin USB Connector to Pin 1 on the pin-out header. Connecting the USB cable improperly may damage the system. Please refer to your system's manu...
