SIIG 4590 - Manual
SIIG 4590 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Hardware Installation
- Page 3 – Driver Installation; Windows ME
- Page 4 – To verify successful driver installation:
- Page 5 – Changing COM Port Address
- Page 6 – Blank Page
- Page 7 – Technical Support and Warranty; O n l i n e S u p p o r t
1
Single-Serial PC Card
Quick Installation Guide
04-0254C
Introducing the
Single-Serial PC Card
The
Single-Serial PC Card
adds one high-speed serial port
(RS232) into your notebook computer to connect various
types of serial devices.
Keys Features and Benefits
•
Works with notebook computers with one Type II/
III PC Card/CardBus slot
•
Fast 16550 UART supports baud rates up to
115.2Kbps
•
Built-in 16-byte FIFO buffer to speed up data transfer
•
Provides one RJ45-to-serial (DB9) removable cable
for device connections
•
Works with various types of RS232 serial devices
including modems, PDAs, label printers, bar code
scanners, digital cameras, and more
System Requirements
•
Pentium or equivalent notebook computer with an
available PC Card slot
•
Windows 98/98SE/ME/2000/XP/Server 2003
Package Contents
•
Single-Serial PC Card
•
RJ45 to 9-pin serial port cable
•
Driver CD
•
This quick installation guide
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Hardware Installation General instructions for installing the card are provided below. Since the design of notebook computers may vary, refer to your system’s reference manual for further information, if needed.1. Power off your notebook computer and any other connected peripheral devices. 2. Inse...
3 Driver Installation Windows 98/98SE 1. At the Add New Hardware Wizard , click Next . 2. Select Search for the best driver for your device (Recommended) , then click Next . 3. Insert the driver CD, check CD-ROM drives , uncheck the other boxes and click Next . 4. Click Next, then Finish . 5. Restar...
4 Windows XP/Server 2003 1. At the Found New Hardware Wizard , XP (w/SP1 or earlier)/Server 2003 : continue to step #2 XP (w/SP2 or later)/Server 2003 (w/ SP1 or later) : select No, not at this time , then click Next . 2. Choose Install from a list or specific location (Advanced) , then click Next ....
