SIIG 104-0732A - Manual
SIIG 104-0732A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Layout; Hardware Installation; SDI IN
- Page 3 – Dip Switch; Re-Clock: Receives a signal and retransmits
- Page 4 – Blank page
- Page 7 – Technical Support and Warranty
1
04-0732A
Introduction
The
1x4 3G-SDI Splitter
allows you to broadcast
3G-SDI signals from one source to four outputs.
Key Features and Benefits
•
Replicates and distributes content from 1
3G-SDI source to 4 outputs
•
Operates at 270Mb/s, 1.485Gb/s and
2.97Gb/s data rates
•
Supports HD formats:
• 720p24, 25, 30, 50 & 60
• 1080i50 & 60
• 1080p24, 25, 30, 50 & 60
•
Supports 525i & 625i SD formats
•
Metal housing and wall-mountable
Package Contents
•
1x4 3G-SDI Splitter
•
Power adapter
•
Quick installation guide
1 x 4 3 G - S D I S p l i t t e r
Quick Installation Guide
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Layout Figure 1: Layout Hardware Installation 1 . Power off all devices you plan to connect to this splitter. 2 . Connect your SDI source to the splitter’s SDI IN connector using a SDI cable (not included). 3 . Connect your displays to the splitter’s SDI OUT connectors using a SDI cables (not incl...
3 Dip Switch • Re-Clock: Receives a signal and retransmits it at a higher level and /or higher power, or onto the other side of an obstruction, so the signal can cover longer distances • LB SEL0: Disabled (Not used) • LB SEL1: Disabled (Not used)Note: Pin up: Enabled (on) Pin down: Disabled (off) Fi...
