SIIG 04-0984A - Manual
SIIG 04-0984A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Caution; location for future reference.
- Page 3 – Hardware Kit; Important; Tools Required
- Page 4 – Step 1: Wall Plate Installation; A) Wood Stud Installation; NOTE
- Page 5 – Note
- Page 6 – Step 2: Display Bracket Installation; points that are located on the back of the display.
- Page 7 – Check the mounting screws every two months for tightness.
- Page 8 – Technical Support and Warranty
1
Low Profile Universal TV Mount
32" to 65"
Installation Instructions
0 4 - 0 9 8 4 A
Important
: If you have difficulty following or understanding these installation instructions,
please consult a qualified installation specialist.
Fixed Flat Screen TV Wall Mount
Material: Cold Rolled Steel Plate
TV size: 32" - 65"
Max load capacity: 110 lbs / 50 kgs
Wall distance: 1.4" / 35 mm
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Caution • Prior to installation of this product, the installation instructions should be read and completely understood. The installation instructions must be read to prevent personal injury and property damage. Keep these installation instructions in an easily accessible location for future refer...
3 Hardware Kit A B C D G E F (x4) M8x15 screw (x4) M6x15 screw (x4) M5x30 screw (x4) M6x30 screw (x4) M8x30 screw (x4) Plastic anchor J H I (x4) Washer (x4) Bolt (x4) Rectangular washer (x1) Bubble level K (x4) Spacer Important : The Low Profile Universal TV Mount - 32" to 65" is shipped wit...
4 Step 1: Wall Plate Installation A) Wood Stud Installation NOTE : For secure wood stud mounting, the wall plate must be mounted to two studs at least 16" apart.1. Use a high quality electronic stud finder (commercially available) to locate dead center of two adjacent wood studs and mark the loc...
