SIIG 04-0945A - Manual
SIIG 04-0945A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Package Contents; x2 HDMI Splitter with 4Kx2K & EDID; Layout
- Page 3 – Figure 2: Front Panel; POWER LED; SIGNAL LED; Hardware Installation; Splitter
- Page 4 – HDMI OUT; NOTE; Mode Dial
- Page 6 – Application; Figure 3: Application
- Page 7 – Technical Support and Warranty
1
1x2 HDMI Splitter with
4Kx2K & EDID Management
Installation Guide
04-0945A
Introduction
The
1x2 HDMI Splitter with 4Kx2K & EDID
Management
splits one HDMI signal to two HDMI
displays at up to 4Kx2K resolution.
Key Features and Benefits
•
Broadcast HDMI video/audio signals from
one HDMI source to two HDMI displays
without losing quality
•
Supports HDMI Deep Color & 3D
•
Supports 1080p and up to 4Kx2K PC
resolution
•
Supports Dolby Digital, DTS-HD and Dolby
True-HD audio
•
Video bandwidth: 340MHz (10.2Gbps)
•
Embedded EDID and EDID learning ability
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Package Contents • 1x2 HDMI Splitter with 4Kx2K & EDID Management • Power adapter (Output: 5V/2A) • Mounting screws (2) • Installation guide Layout Figure 1: Rear Panel • HDMI IN : Connects to your HDMI source device by using an HDMI cable (cable not included) • HDMI OUT 1-2 : Connects to your...
3 • MODE : Selects alternate EDID modes and functions. See Mode Dial in page 4 & 5. • DC 5V : Power adapter jack for the included 5V power adapter Figure 2: Front Panel • POWER LED : On when the Splitter is powered on • SIGNAL LED : On when HDMI source is detected Hardware Installation 1. Power ...
4 3. Connect your HDMI displays to the Splitter 's HDMI OUT using HDMI cables (HDMI cables not included). 4. Connect the included power adapter to the Splitter 's DC 5V power jack and plug it into a reliable power outlet. 5. Power on all of the connected devices. 6. The Splitter is now ready to use....
