SIIG 04-0676A - Manual
SIIG 04-0676A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLATION AND OPERATING INSTRUCTIONS; Caution
- Page 4 – NOTE: The concrete anchors must be used for concrete installation.; Step 2 Display Bracket Installation
- Page 5 – Check the mounting screws every two months for tightness.; Step 3 Final Installation & Adjustment
- Page 6 – Blank Page
- Page 7 – Technical Support and Warranty
- Page 8 – PRODUCT NAME
04-0676A
Universal Tilting TV Mount - 23" to 42"
Installation Instructions
Tilting Flat-Panel TV Wall Mount
Bubble level included
Material: 2.0mm Cold Rolled Steel Plate
TV Size: 23" - 42"
Tilt: 0 / +15 degrees
Maximum load capacity: 99lbs / 45kgs
Wall distance: 3.1" / 80mm
Universal Mounting Pattern
IMPORTANT: If you don't understand the installation instructions, please
consult an installation specialist
1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
A1 D A2 E B1 F B2 G1 C1 G2 C2 H 1 Phillips head screw driver 2 Stud finder for drywall installation 3 7/16" Socket and Wrench 4 (×6) M6 washer (x1) External bubble level (x4) M5x30 screw (×6) M6 concrete anchor Electric drill, 1/8" (3mm) drill bit for wood stud installation and 5/16" (8m...
1 2 3 4 5 6 7 4 5 Attach the bubble level (G2) to the wall plate, with the help of an assistant place the wall plate into position against the wall, using the bubble level to keep it level. Mark four holes to be used for securing the mount and place the wall plate aside. NOTE: The concrete anchors m...
1 2 3 Check the mounting screws every two months for tightness. Step 3 Final Installation & Adjustment Maintenance The TV rail can be tilted down up to 15 degrees. To make this adjustment, first loosen the knob and pull or pushthe rail until it is in the desired position. Once the desired level ...
