SIIG 04-0643B - Manual

SIIG 04-0643B – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – System Requirements; Notebook or desktop PC with an available; Note; Package Contents; Installation kit; Layout
Page 4 – Hardware Installation; The following section guides you through the; Figure; . Slide the top cover out of the case, then; Figure 4
Page 5 – Take off the PCB and connect it to the hard; and; Figure 6
Page 6 – Hold onto the hard disk drive and turn the; Figure 8
Page 7 – Enclosure
Page 8 – Driver Installation; Using the; My; Disconnecting From The Computer; SuperSpeed USB 3.0 to
Page 11 – Technical Support and Warranty

Loading the manual

SuperSpeed USB 3.0 to
SATA 2.5" Enclosure

Q u i c k I n s t a l l a t i o n G u i d e

04-0643B

Introducing the

USB 3.0 2.5" Enclosure

The

SuperSpeed USB 3.0 to SATA 2.5" Enclosure

designed to support USB equipped computers.

This enclosure provides large capacity mobile

storage using 2.5" SATA hard disk drives through

hot-swapping SuperSpeed USB 3.0 interface.

Key Features and Benefits

•

Quickly adds more storage space to your

USB-enabled PC (USB 3.0 recommended)

•

No driver installation required. Simply

install a 2.5" SATA (3Gb/s or 1.5Gb/s)

hard disk into the enclosure then connect to

a USB port

Note

: For maximum data throughput, use

a S A T A 3 G b / s h a r d d i s k w i t h t h e

enclosure and connect to a fully functional

USB 3.0 port.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - System Requirements; Notebook or desktop PC with an available; Note; Package Contents; Installation kit; Layout

2 System Requirements • Notebook or desktop PC with an available USB 2.0/3.0 port (USB 3.0 recommended) • Windows ® 7 (32-/64-bit) ) / Vista (32-/64- bit) / XP (32-/64-bit) / Server 2003 & 2008 (32-/64-bit)** Note : USB 3.0 support is currently available for Windows 7, Vista and XP. Package Cont...

Page 4 - Hardware Installation; The following section guides you through the; Figure; . Slide the top cover out of the case, then; Figure 4

4 Hardware Installation The following section guides you through the installation of your drive kit. Installing a 2.5" Hard Drive 1 . Remove the 2 screws in each side, see Figure 3 . Slide the top cover out of the case, then slide the lower cover out of the case, see Figure 4 . screws Figure 3 F...

Page 5 - Take off the PCB and connect it to the hard; and; Figure 6

5 2 . Take off the PCB and connect it to the hard disk drive, see Figure 5 and Figure 6 . Figure 5 Figure 6