SIIG 04-0476A - Manual
SIIG 04-0476A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Hardware Installation; Isolation sponge; Adapter; figure; This step is optional.; Figure 4; figure 4; attaching sponge
- Page 4 – figure 6; Figure 6; figure 8; Figure 8
- Page 5 – Windows Driver Installation; No driver installation needed.
- Page 6 – Blank Page
- Page 7 – Technical Support and Warranty; Online Support
- Page 8 – networking, sound cards, and other accessories. SIIG is the premier; FCC COMPLIANCE STATEMENT:
1
SATA-to-IDE Adapter
Quick Installation Guide
0 4 - 0 4 7 6 A
Introducing the
SATA-to-IDE Adapter
The
SATA-to-IDE Adapter
allows you to connect existing
Ultra ATA 150/133/100/66 hard disk drive and ATAPI
devices to the latest Serial ATA host adapter.
Features and Benefits
•
Quickly converts older IDE/Ultra DMA devices for
use with newer Serial ATA controllers
•
L-shape compact design to reduce interference with
other devices
•
Connects directly to an IDE drive
—
no expansion
slot required
•
Compliant with Serial ATA 1.0a specification
•
Supports ATA/ATAPI Ultra DMA data transfer
rates up to 150MB/s
•
Compliant with ATA/ATAPI PIO modes 0 to 4
•
Connects large Ultra ATA 133/100/66 hard disks to
the latest Serial ATA hosts
•
Works with ATAPI optical storage devices such as
CD-ROM, CD-RW, DVD-ROM and DVD-RW (up to
16x)
Serial Number Sticker
For future product return or exchange, this serial number
is required. Please keep it for your reference.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 Hardware Installation Static Electricity Discharge may permanently damage your system. Discharge any static electricity build up in your body by touching your computer case for a few seconds. Avoid any contact with internal parts and handle cards only by their external edges.1. Turn OFF the power ...
4 5. Connect the SATA data cable to the adapter, refer to figure 6 and 7 . Figure 6 Figure 7 6. Connect the "Y" split power cable to the adapter, refer to figure 8 and 9 . Figure 8 Figure 9 7. Connect the other end of the SATA data cable to the S A T A p o r t o n t h e S A T A h o s t a d a...
5 8. Connect the "Y" split power connector to power the IDE drive, refer to figure 10 . Figure 10 9. Connect the other end of the “ Y ” split power cable to the system power source. 10. The hardware installation is completed now.11. Replace the computer cover and reconnect the power cord. Wi...
