SIIG 04-0444A - Manual
SIIG 04-0444A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Package Contents; This quick installation guide; Layout; Figure 1. Board Layout; This power connector (same as the one used
- Page 3 – Header; Hardware Installation
- Page 4 – Windows Driver Installation; My Computer
- Page 6 – Blank Page
- Page 7 – Technical Support and Warranty; O n l i n e S u p p o r t
- Page 8 – FCC COMPLIANCE STATEMENT:; Networking, Sound Cards, and other accessories. SIIG is the premier
1
Hi-Speed USB 5-Port PCI
Quick Installation Guide
04-0444A
Features and Benefits
•
Compliant with USB specifications revision 2.0
•
Conforms to PCI specifications revision 2.2
•
Supports simultaneous operation of multiple
high-speed USB 2.0 and USB 1.1 devices
•
Supports high-speed (480 Mbps), full-speed (12
Mbps), and low-speed (1.5 Mbps) data transfer
modes
•
User friendly hot-swapping feature allows you to
attach/remove USB devices withou turning off your
system
Note:
USB 1.1 devices are limited to USB 1.1 speeds
even when they are connected to USB 2.0 host adapter
or USB 2.0 hubs.
System Requirements
PC:
•
Pentium-class computer with an available PCI slot
•
Windows 2000 SP4 or later/XP SP1 or later/
Server 2003/Vista
Mac:
•
Power Mac G3 (blue & white) or later with an
available PCI slot
•
Mac OS 10.2.8 or later
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Package Contents • Hi-Speed USB 5-Port PCI • This quick installation guide Layout Figure 1. Board Layout * Note: This power connector (same as the one used with your floppy disk drive) is designed to provide additional power to the board when needed. Connect this power connector (recommended) when...
3 USB Pin-out Header The USB pin-out header consists of 4 pins and allows for 1 USB connection. Important: The internal USB port and the USB Pin-out Header can not be used at the same time. Do not connect devices to both ports at the same time. VCC/+ 5VDC DATA - DATA + GND Red Green White Black Figu...
4 4. Carefully align the card to the selected PCI slot, push the board down firmly, but gently, until it is well seated. 5. Replace the slot bracket's holding screw to secure the card. 6. Replace the computer cover and reconnect the power cord. Windows Driver Installation The Hi-Speed USB 5-Port PCI...
