SIIG 04-0414D - Manual
SIIG 04-0414D – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Layout; Note; to the; of the; Figure 1; above for more information.
- Page 3 – Hardware Installation; Driver Installation; CyberSerial Dual ExpressCard
- Page 4 – Windows XP; Our driver has been
- Page 5 – Windows VistaTM
- Page 7 – Technical Support and Warranty; Online Support
1
CyberSerial Dual
ExpressCard
Quick Installation Guide
0 4 - 0 4 1 4 D
Introducing the
CyberSerial ExpressCard
The
CyberSerial Dual ExpressCard
adds two high-speed
serial ports to an ExpressCard equipped computer.
Features and Benefits
•
Compatible with hi-speed modems, monitoring
equipment, serial networking and other serial
devices
•
Two DB9 RS232 ports with 16550 UART
•
Supports data rate of up to 115 Kbps
•
Built-in 16-byte FIFO buffers dramatically increase
data transmit/receive speed, especially under
Windows multitasking environment
System Requirements
•
Notebook or desktop computer with an available
ExpressCard slot
•
Windows
®
2000/XP (32-/64-bit)/Server 2003
(32-/64-bit)/Vista (32-bit)
Package Contents
•
CyberSerial Dual ExpressCard
•
2-Port DB9 Fan-out Cable
•
Driver CD
•
Quick Installation Guide
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Layout Figure 1: CyberSerial Dual ExpressCard 2-Port DB9 Fan-out Cable ExpressCard Connector Figure 2: 2-Port DB9 Fan-out Cable Note : Connect 2S to the Fan-out Cable Connector of the CyberSerial Dual ExpressCard . See Figure 1 above for more information. Fan-out Cable Connector DB9 Serial Ports 2...
3 Hardware Installation General instructions for installing the ExpressCard are provided below. Since the design of notebook computers vary, refer to your system ’ s reference manual for further information, if needed.1. Insert the CyberSerial Dual ExpressCard into the ExpressCard slot of the comput...
4 3. Check Specify a location , uncheck the other boxes, then click Next . 4. Insert the driver CD, type in D:\2000 , then click OK . (Change D: to match your CD-ROM drive letter) 5. Click Next and Finish . 6. Repeat steps 1-5 to complete the driver installation. Windows XP 1. At the Found New Hardw...
