SIIG 04-0349D - Manual
SIIG 04-0349D – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Hardware Installation; Figure 3; USB to Serial; Figure 4
- Page 4 – Driver Installation
- Page 6 – Windows ME
- Page 7 – To Verify Windows ME / 98SE / 98 Installation
- Page 8 – USB to
- Page 9 – Changing COM Port Number
- Page 10 – Blank Page
- Page 11 – Technical Support and Warranty
1
USB to Serial
Quick Installation Guide
04-0349D
Introduction
The
USB to Serial
adapter converts one USB port to multiple
9-pin (DB9) serial ports.
Features and Benefits
•
Full support for Windows-based software
•
Low power consumption. Draws power from USB
bus
•
Supports baud rates up to 115 Kb/s
•
Handy wall-mount bracket keeps your desktop
uncluttered
•
Works with modems, ISDN terminal adapters,
graphics tablets, PDAs, bar code scanners, label
printers and other RS232 serial devices
•
Built-in 16550 UART with 16-byte FIFO buffers to
dramatically increase data transmit/receive speed,
e s p e c i a l l y u n d e r W i n d o w s m u l t i t a s k i n g
environment
System Requirements
•
Pentium or equivalent computer with an available
USB port
•
Windows
®
8 (32-/64-bit) / 7 (32-/64-bit) / Vista (32-
/64-bit) / XP (32-/64-bit) / Server 2003 & 2008 (32-
/64-bit) / Server 2008 R2 / 2000 / ME / 98SE / 98
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 Hardware Installation The USB to Serial adapter's Mounting bracket kit adds wall mount capabilities. Follow the instructions below to mount your USB to Serial adapter to the wall and keep your desktop uncluttered.1. Use the 4 screws in your package to screw your Mounting bracket to the wall, see F...
4 Driver Installation NOTE: Do not plug in the USB to Serial adapter to your computer until instructed to do so. If you have plugged in the adapter prior to installing the driver, click Cancel at the Found New Hardware (if prompted), unplug the adapter, then follow the driver installation steps belo...
6 4. Restart Windows to complete the installation. Windows ME 1. At the Windows desktop, insert the driver CD and wait for several seconds. 2. Plug the USB to Serial adapter into an available USB port. 3. At the Add New Hardware Wizard , choose A u t o m a t i c s e a r c h f o r a b e t t e r d r i...
