SIIG 04-0265F - Manual
SIIG 04-0265F – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Package Contents; Serial ATA PCI; Board Layout; Hardware Installation
- Page 3 – Device Connection; Serial ATA connector
- Page 4 – Driver Installation
- Page 5 – Windows ME
- Page 6 – To Verify Windows 98SE/ME Installation; This device is working
- Page 8 – To Verify Windows NT4.0 Installation
- Page 11 – Windows Vista
- Page 12 – To Verify Windows Vista Installation
- Page 13 – Existing Windows 2008 Installation
- Page 14 – Verify Server 2008 Installation; Bios Configuration
- Page 15 – Technical Support and Warranty; Online Support
- Page 16 – networking, sound cards, and other accessories. SIIG is the premier
1
Serial ATA PCI
Quick Installation Guide
0 4 - 0 2 6 5 F
Introducing the Serial ATA PCI
The
Serial ATA PCI
is an ultra high-speed dual channel
Serial ATA controller board for use in Pentium-class
computers. It achieves burst data transfer rates up to
150MB/s (1.5Gb/s) and supports various brand of hard
disk drives with capacities greater that 137GB.
Features and Benefits
•
Add up to two high-speed SATA hard drives
•
New Serial ATA cable - easier to install & provides
better air circulation
•
Compliant with Serial ATA 1.0 specification
•
Compliant with PCI 2.3 specification
•
S u p p o r t s d a t a t r a n s f e r r a t e u p t o 1 . 5 G b / s
(150MB/s)
•
Two independent bus master DMA channels with
256-byte FIFOs per channel for host reads and writes
•
Breaks the 137GB barrier! Works with various brands
of large capacity Serial ATA hard disk drives
System Requirements
•
Pentium
®
or equivalent PC with an available PCI
slot
•
Windows
®
98SE / ME / NT4.0 / 2000 / XP (32-/64-
bit) / Server 2003 & 2008 (32-/64-bit) / Vista (32-/
64-bit)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Package Contents • Serial ATA PCI adapter • Driver CD • Serial ATA cable • Serial ATA power cable • Quick installation guide Board Layout Figure 1. Serial ATA PCI Board Layout Hardware Installation General instructions for installing the card are provided below. Since the design of computer cases ...
3 1. Turn OFF the power to your computer and any other connected peripheral devices. 2. Unplug the power cord from the back of the computer. 3. Remove the computer cover. 4. Remove the slot bracket from an available PCI slot. 5. To install the card, carefully align the card bus c o n n e c t o r t o...
4 Figure 3. Connecting the Serial ATA cable 5. Follow the same instructions when connecting a second hard drive. Device connection is now complete. 6. Replace the computer cover and reconnect the power cord. Driver Installation This section provides information on how to install the Serial ATA PCI d...
