Page 2 - Safety information; CaUtion/WarninG SymBoLS USeD; otHer SymBoLS USeD
02_ safety information Safety information Safety information • Before operating the appliance, please read this manual thoroughly and retain it for your reference. • Because these following operating instructions cover various models, the characteristics of your vacuum cleaner may differ slightly fr...
Page 3 - important Safety inStrUCtionS
safety information _03 important Safety inStrUCtionS When using an electrical appliance, basic precautions should be observed, including the following: reaD aLL inStrUCtionS Before USinG yoUr VaCUUm CLeaninG roBot. Unplug from outlet when not in use and before conducting maintenance. WarninG: to red...
Page 4 - VaCUUm CLeaninG roBot
04_ safety information corners. Keep the cord away from heated surfaces. • Do not use extension cords or outlets with inadequate current carrying capacity. • Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord. • Do not mutilate or incinerate batteries as they will explode ...
Page 5 - Contents
contents _05 Contents SAfety INfoRmAtIoN 02 06 Power Related 07 Before Use 10 In Use 11 Cleaning and Maintenance PRoduct feAtuReS 13 ASSemblING the cleANeR 15 15 Components 16 Name of each part oPeRAtING the cleANeR 20 20 Installing the vacuum cleaning robot 20 Installation order 20 Turning the Powe...
Page 6 - poWer reLateD; do not bend the power cord forcefully or place a heavy object; make sure to remove any dust or water from the power plug.; do not pull the power plug by the cord or touch the plug with; do not use a damaged power cord, plug, or a loose power
06_ safety information poWer reLateD WARNING do not bend the power cord forcefully or place a heavy object on it that could break it. - This may result in fire or electric shock. WARNING make sure to remove any dust or water from the power plug. - Failing to do so may result in a malfunction or elec...
Page 7 - Before USe
safety information _07 01 S afety informa tion Before USe cAutIoN before activating the vacuum cleaning robot, make sure that the dust bin is assembled. - If the dust bin is not inserted, vacuum cleaning robot will not operate. cAutIoN Never use vacuum cleaning robot in locations with combustible ma...
Page 10 - in USe
10_ safety information in USe cAutIoN you cannot use the vacuum cleaning robot on thick carpets. - This may result in problems with the vacuum cleaning robot. - This may result in damage to carpets. cAutIoN do not use the vacuum cleaning robot on a table or other high locations. - This may result in...
Page 11 - CLeaninG anD maintenanCe
safety information _11 01 S afety informa tion cAutIoN do not move the robotic vacuum cleaner holding the dustbin part. - This may cause the dustbin to separate, resulting in injury or serious damage to the product. Note Vacuum cleaning robot may not be able to continue its operation if it is stuck ...
Page 13 - ConVenient VirtUaL GUarD fUnCtion; What is ceiling shape recognition (Visionary; DeLiCate CLeaninG of eVery Corner; Product features
product features _13 ConVenient VirtUaL GUarD fUnCtion You can confine the vacuum cleaning robot to a particular section by using the Fence (virtual wall) mode. • What is ceiling shape recognition (Visionary mapping plus™)? This function recognizes the shape of the ceiling using the camera on top to...
Page 14 - aUto CHarGinG; aVoiDinG oBStaCLeS
14_ product features aUto CHarGinG When the battery is low, the vacuum cleaning robot is automatically guided to the charger to enable it to perform a quick auto charge. eDGe-CLeaninG SiDe rotatinG BrUSH The edge-cleaning side rotating brush cleans dust from the edges. DoorSiLL CroSSinG about 1cm St...
Page 15 - ComponentS; others Components; user manual; Assembling the cleaner; main Body
assembling _15 02 a SSemBLin G ComponentS ■ others Components (aaa-type Batteries) user manual (cd-Rom) / 2 battery VIRtuAl GuARd Spare filter cleaning brush Quick Start Guide ❈ Mesh and Sponge filters are not included in spare filters. Assembling the cleaner ■ main Body ■ Charger (Station) ■ remote...
Page 16 - name of eaCH part; front
16_ assembling name of eaCH part front Bottom Side ■ main unit Virtual Guard Sensor Dustbin eject Button Camera obstacle Sensor Dustbin eject Button Dust bin Driving Wheel power Switch power Brush power Brush Cover Battery Cover Driving Wheel remote Control Sensor obstacle Sensor Bumper Sensor remot...
Page 17 - VirtUaL GUarD; Installing the batteries
assembling _17 02 a SSemBLin G ■ Charger (Station) ■ VirtUaL GUarD Distance Detection Sensor Lamp power Button main Body Detection Sensor ■ Installing the batteries Batteries are not supplied with the product. You have to purchase the batteries separately. Install the alkaline batteries (type D) bef...
Page 18 - Installing the Remote control batterise; remote Control
18_ assembling ■ Installing the Remote control batterise Batteries are not installed in the remote control when purchasing the product.Install the batteries (type AAA) before use. 1 2 3 Lift the battery compartment cover at the back of the remote control, while pressing the locking tab. Install the ...
Page 19 - DiSpLay part; battery level Indicator; cleaning mode display; BUtton part; Display panel
assembling _19 02 a SSemBLin G DiSpLay part 1. Number display - Shows the timer display, progress status, and error codes using numbers, letters and graphics. 2. battery level Indicator - Charging : Shows the charging progress in 3 steps. - In Use : Shows the battery charge level. The battery charge...
Page 20 - inStaLLinG tHe VaCUUm CLeaninG roBot; installation order; Operating the cleaner
20_ operating inStaLLinG tHe VaCUUm CLeaninG roBot installation order 1. turning the Power Switch on or off To use the vacuum cleaning robot, you must turn on the Power Switch at the bottom of the main unit. 2. Installing the charger To charge the vacuum cleaning robot, you must first install the ch...
Page 21 - installing the charger; Always keep the power cord of the charger plugged
operating _21 03 opera tinG installing the charger 1. Install the charger on a flat surface. 2. There should be no obstacles and cliffs 0.5m to the left and right and within 1 m of the front. 3. Install the charger in a location where it can be easily accessed by the vacuum cleaning robot. 4. Arrang...
Page 22 - Charging
22_ operating Charging When the product is initially purchased, the battery is fully discharged, and you must charge the vacuum cleaning robot manually. Turn on the Power Switch at the bottom of the product. 1. After aligning the charge pins of the main unit with the charge pin of the charger statio...
Page 23 - about the Battery
operating _23 03 opera tinG Note • When the product is initially purchased, it will take about 180 minutes to fully charge the battery and will run for about 100 minutes. (Normal Mode / On the basis of hard floor) • When charging the battery while the battery is over-heated, the charging time can in...
Page 24 - installing the VirtUaL GUarD; button operations; Install the VIRtuAl GuARd in front of the area you
24_ operating installing the VirtUaL GUarD You can confine the vacuum cleaning robot to a particular section by using Fence (virtual wall) mode. button operations 1. lamp operations - Fence (virtual wall) Mode: The red lamp flashes. - Off :The lamp is turned off. 2. turn the Power button on - Whenev...
Page 25 - About the IrdA sensor
operating _25 03 opera tinG About the IrdA sensor • The infrared signal transmission may not be smooth in locations exposed to halogen lamps or in outdoor locations. • Vacuum cleaning robot uses 3 types of infrared devices and a device may not work in front of another device with a higher priority. ...
Page 26 - USinG tHe VaCUUm CLeaninG roBot; Starting/Stopping Cleaning; you can run or stop all vacuum cleaning robot functions.; Using the remote
26_ operating USinG tHe VaCUUm CLeaninG roBot Starting/Stopping Cleaning you can run or stop all vacuum cleaning robot functions. ■ Each vacuum cleaning robot function only runs when the Power Switch is turned on. ■ When the vacuum cleaning robot is operating, press the ( ) button to cancel the oper...
Page 27 - recharging; you can have the vacuum cleaning robot return to the charger; Using the main unit
operating _27 03 opera tinG recharging you can have the vacuum cleaning robot return to the charger to charge the battery by using the Recharging button. ■ When the vacuum cleaning robot is operating, press the ( ) button to cancel the operation and press the Recharging button. 1. Press the Rechargi...
Page 28 - auto Cleaning; the vacuum cleaning robot will move by itself and automatically; normal mode; About the Resume cleaning function
28_ operating auto Cleaning the vacuum cleaning robot will move by itself and automatically clean the house until cleaning is completed once. ■ If you press the Start/Stop button on the main unit or remote control without selecting a cleaning mode, an automatic cleaning run starts. ■ If cleaning beg...
Page 29 - Spot Cleaning; you can conveniently clean a specific area that has a a lot of
operating _29 03 opera tinG Spot Cleaning you can conveniently clean a specific area that has a a lot of cookie crumbs, dust, and etc. ■ Move the vacuum cleaning robot to the location where you want to perform a spot clean. main unit button Remote control button configuration Sequence normal mode tu...
Page 30 - max Cleaning; the vacuum cleaning robot automatically moves and cleans until
30_ operating max Cleaning the vacuum cleaning robot automatically moves and cleans until the battery runs out and the battery level flashes only one level. ■ If cleaning begins when the vacuum cleaning robot is docked with the charger station, the time to return to the charger is decreased since th...
Page 31 - manual Cleaning; you can move the vacuum cleaning robot to clean a particular; Remote control button
operating _31 03 opera tinG manual Cleaning you can move the vacuum cleaning robot to clean a particular location directly by using the remote control. ■ Move the vacuum cleaning robot to the location where you want to perform manual cleaning. ■ You can manually clean using the remote control only. ...
Page 32 - Delay Start; In this mode, you can schedule the cleaner to start a once-off; canceling the Settings
32_ operating Delay Start In this mode, you can schedule the cleaner to start a once-off cleaning run from a particular time. ■ A scheduled cleaning run is only performed when the cleaner is docked to the charger station. Remote control configuration Sequence Blinks Blinks Decrease increase 1. Press...
Page 33 - aDDitionaL fUnCtionS; Using additional functions; turbo mode
operating _33 03 opera tinG aDDitionaL fUnCtionS Using additional functions you can use the cleaning robot more easily and conveniently using various additional functions. ■ You can only configure the additional functions with the remote control. turbo mode Each time you press the Turbo button, the ...
Page 34 - CLeaninG tHe VaCUUm CLeaninG roBot; please keep the cleaning and maintenance methods in mind; you must turn off the Power Switch at the bottom of the main; front Sensor Window and; Maintain tools and filters
34_ maintain CLeaninG tHe VaCUUm CLeaninG roBot please keep the cleaning and maintenance methods in mind ■ When the Power Switch is damaged, please contact the service agent so that it does not cause any accidents. ■ Do not use any means or mechanical devices not installed by the manufacturer that c...
Page 35 - Cleaning the Dust Bin and the filters; first, empty the dust bin before cleaning it.
maintain _35 04 maint ain Cleaning the Dust Bin and the filters first, empty the dust bin before cleaning it. ■ When separating the dust bin, take care not to spill the dust out of the dust bin. ■ Empty the dust bin in the following cases. 1. When dust has accumulated inside the dust bin. 2. When th...
Page 36 - Cleaning the power Brush; you must turn off the Power Switch at the bottom of the
36_ maintain CLeaninG tHe VaCUUm CLeaninG roBot Cleaning the power Brush you must turn off the Power Switch at the bottom of the main unit before cleaning the vacuum cleaning robot. • Because the dust in the dust bin may come out, separate the dust bin first before cleaning the power brush. 1. After...
Page 38 - Cleaning the edge-Cleaning Side rotating Brush
38_ maintain Cleaning the edge-Cleaning Side rotating Brush you must turn off the Power Switch at the bottom of the main unit before cleaning the vacuum cleaning robot. 1. Check whether the side rotating brush is bent or whether there are any foreign substances stuck on the brush. 2. Wearing rubber ...
Page 39 - Cleaning the Driving Wheel
maintain _39 04 maint ain Cleaning the Driving Wheel you must turn off the Power Switch at the bottom of the main unit before cleaning the robot. ■ If the vacuum cleaning robot suddenly starts to zigzag, there may be foreign substances stuck on the driving wheel. 1. When cleaning the driving wheel, ...
Page 40 - CHeCkLiSt Before SVC CaLLS; Symptom; Troubleshooting
40_ troubleshooting CHeCkLiSt Before SVC CaLLS Symptom checklist measure to take Vacuum cleaning robot does not operate at all before cleaning. • Is the dust bin assembled? • Install the dust bin. • Is the Power Switch turned on? • Turn on the Power Switch. • Is cleaning mode in the display panel tu...
Page 42 - troUBLeSHootinG for error CoDeS; eRRoR code
42_ troubleshooting troUBLeSHootinG for error CoDeS eRRoR code cAuSe SolutIoN • Vacuum cleaning robot is caught, stuck or trapped while navigating. • Turn off the Power Switch at the bottom and move the vacuum cleaning robot to a different location. • A foreign substance (string, paper, toy etc.) is...
Page 43 - main body; Product specification
product specification _43 06 pro DUC t S peC ifi C ation 80 mm (Height) 350 mm (Length) 350 mm (Width) 275 mm (Width) 161 mm (Length) 122 mm (Height) main body charger(Station) classification Item SR893* SeRIeS mechanical Specifications Diameter 350mm Height 80mm Weight 3.2kg electrical Specificatio...
Page 44 - open SoUrCe annoUnCement
open SoUrCe annoUnCement Some software components of this product incorporate source code covered under the BSD.And this software is based in part on the work of the Independent JPEG Group. ■ opencV : IMPORTANT : READ BEFORE DOWNLOADING, COPYING, INSTALLING OR USING.By downloading, copying, installi...
