Samsung SR8930 - Manuals

contents _05 Contents SAfety INfoRmAtIoN 02 06 Power Related 07 Before Use 10 In Use 11 Cleaning and Maintenance PRoduct feAtuReS 13 ASSemblING the cleANeR 15 15 Components 16 Name of each part oPeRAtING the cleANeR 20 20 Installing the vacuum cleaning robot 20 Installation order 20 Turning the Powe...

06_ safety information poWer reLateD WARNING do not bend the power cord forcefully or place a heavy object on it that could break it. - This may result in fire or electric shock. WARNING make sure to remove any dust or water from the power plug. - Failing to do so may result in a malfunction or elec...

safety information _07 01 S afety informa tion Before USe cAutIoN before activating the vacuum cleaning robot, make sure that the dust bin is assembled. - If the dust bin is not inserted, vacuum cleaning robot will not operate. cAutIoN Never use vacuum cleaning robot in locations with combustible ma...

10_ safety information in USe cAutIoN you cannot use the vacuum cleaning robot on thick carpets. - This may result in problems with the vacuum cleaning robot. - This may result in damage to carpets. cAutIoN do not use the vacuum cleaning robot on a table or other high locations. - This may result in...

safety information _11 01 S afety informa tion cAutIoN do not move the robotic vacuum cleaner holding the dustbin part. - This may cause the dustbin to separate, resulting in injury or serious damage to the product. Note Vacuum cleaning robot may not be able to continue its operation if it is stuck ...

product features _13 ConVenient VirtUaL GUarD fUnCtion You can confine the vacuum cleaning robot to a particular section by using the Fence (virtual wall) mode. • What is ceiling shape recognition (Visionary mapping plus™)? This function recognizes the shape of the ceiling using the camera on top to...

14_ product features aUto CHarGinG When the battery is low, the vacuum cleaning robot is automatically guided to the charger to enable it to perform a quick auto charge. eDGe-CLeaninG SiDe rotatinG BrUSH The edge-cleaning side rotating brush cleans dust from the edges. DoorSiLL CroSSinG about 1cm St...

assembling _15 02 a SSemBLin G ComponentS ■ others Components (aaa-type Batteries) user manual (cd-Rom) / 2 battery VIRtuAl GuARd Spare filter cleaning brush Quick Start Guide ❈ Mesh and Sponge filters are not included in spare filters. Assembling the cleaner ■ main Body ■ Charger (Station) ■ remote...

16_ assembling name of eaCH part front Bottom Side ■ main unit Virtual Guard Sensor Dustbin eject Button Camera obstacle Sensor Dustbin eject Button Dust bin Driving Wheel power Switch power Brush power Brush Cover Battery Cover Driving Wheel remote Control Sensor obstacle Sensor Bumper Sensor remot...

assembling _17 02 a SSemBLin G ■ Charger (Station) ■ VirtUaL GUarD Distance Detection Sensor Lamp power Button main Body Detection Sensor ■ Installing the batteries Batteries are not supplied with the product. You have to purchase the batteries separately. Install the alkaline batteries (type D) bef...

18_ assembling ■ Installing the Remote control batterise Batteries are not installed in the remote control when purchasing the product.Install the batteries (type AAA) before use. 1 2 3 Lift the battery compartment cover at the back of the remote control, while pressing the locking tab. Install the ...

assembling _19 02 a SSemBLin G DiSpLay part 1. Number display - Shows the timer display, progress status, and error codes using numbers, letters and graphics. 2. battery level Indicator - Charging : Shows the charging progress in 3 steps. - In Use : Shows the battery charge level. The battery charge...

20_ operating inStaLLinG tHe VaCUUm CLeaninG roBot installation order 1. turning the Power Switch on or off To use the vacuum cleaning robot, you must turn on the Power Switch at the bottom of the main unit. 2. Installing the charger To charge the vacuum cleaning robot, you must first install the ch...

operating _21 03 opera tinG installing the charger 1. Install the charger on a flat surface. 2. There should be no obstacles and cliffs 0.5m to the left and right and within 1 m of the front. 3. Install the charger in a location where it can be easily accessed by the vacuum cleaning robot. 4. Arrang...

22_ operating Charging When the product is initially purchased, the battery is fully discharged, and you must charge the vacuum cleaning robot manually. Turn on the Power Switch at the bottom of the product. 1. After aligning the charge pins of the main unit with the charge pin of the charger statio...

operating _23 03 opera tinG Note • When the product is initially purchased, it will take about 180 minutes to fully charge the battery and will run for about 100 minutes. (Normal Mode / On the basis of hard floor) • When charging the battery while the battery is over-heated, the charging time can in...

24_ operating installing the VirtUaL GUarD You can confine the vacuum cleaning robot to a particular section by using Fence (virtual wall) mode. button operations 1. lamp operations - Fence (virtual wall) Mode: The red lamp flashes. - Off :The lamp is turned off. 2. turn the Power button on - Whenev...

operating _25 03 opera tinG About the IrdA sensor • The infrared signal transmission may not be smooth in locations exposed to halogen lamps or in outdoor locations. • Vacuum cleaning robot uses 3 types of infrared devices and a device may not work in front of another device with a higher priority. ...

26_ operating USinG tHe VaCUUm CLeaninG roBot Starting/Stopping Cleaning you can run or stop all vacuum cleaning robot functions. ■ Each vacuum cleaning robot function only runs when the Power Switch is turned on. ■ When the vacuum cleaning robot is operating, press the ( ) button to cancel the oper...

operating _27 03 opera tinG recharging you can have the vacuum cleaning robot return to the charger to charge the battery by using the Recharging button. ■ When the vacuum cleaning robot is operating, press the ( ) button to cancel the operation and press the Recharging button. 1. Press the Rechargi...

28_ operating auto Cleaning the vacuum cleaning robot will move by itself and automatically clean the house until cleaning is completed once. ■ If you press the Start/Stop button on the main unit or remote control without selecting a cleaning mode, an automatic cleaning run starts. ■ If cleaning beg...

operating _29 03 opera tinG Spot Cleaning you can conveniently clean a specific area that has a a lot of cookie crumbs, dust, and etc. ■ Move the vacuum cleaning robot to the location where you want to perform a spot clean. main unit button Remote control button configuration Sequence normal mode tu...

30_ operating max Cleaning the vacuum cleaning robot automatically moves and cleans until the battery runs out and the battery level flashes only one level. ■ If cleaning begins when the vacuum cleaning robot is docked with the charger station, the time to return to the charger is decreased since th...

operating _31 03 opera tinG manual Cleaning you can move the vacuum cleaning robot to clean a particular location directly by using the remote control. ■ Move the vacuum cleaning robot to the location where you want to perform manual cleaning. ■ You can manually clean using the remote control only. ...

32_ operating Delay Start In this mode, you can schedule the cleaner to start a once-off cleaning run from a particular time. ■ A scheduled cleaning run is only performed when the cleaner is docked to the charger station. Remote control configuration Sequence Blinks Blinks Decrease increase 1. Press...

operating _33 03 opera tinG aDDitionaL fUnCtionS Using additional functions you can use the cleaning robot more easily and conveniently using various additional functions. ■ You can only configure the additional functions with the remote control. turbo mode Each time you press the Turbo button, the ...

34_ maintain CLeaninG tHe VaCUUm CLeaninG roBot please keep the cleaning and maintenance methods in mind ■ When the Power Switch is damaged, please contact the service agent so that it does not cause any accidents. ■ Do not use any means or mechanical devices not installed by the manufacturer that c...

maintain _35 04 maint ain Cleaning the Dust Bin and the filters first, empty the dust bin before cleaning it. ■ When separating the dust bin, take care not to spill the dust out of the dust bin. ■ Empty the dust bin in the following cases. 1. When dust has accumulated inside the dust bin. 2. When th...

36_ maintain CLeaninG tHe VaCUUm CLeaninG roBot Cleaning the power Brush you must turn off the Power Switch at the bottom of the main unit before cleaning the vacuum cleaning robot. • Because the dust in the dust bin may come out, separate the dust bin first before cleaning the power brush. 1. After...

38_ maintain Cleaning the edge-Cleaning Side rotating Brush you must turn off the Power Switch at the bottom of the main unit before cleaning the vacuum cleaning robot. 1. Check whether the side rotating brush is bent or whether there are any foreign substances stuck on the brush. 2. Wearing rubber ...

maintain _39 04 maint ain Cleaning the Driving Wheel you must turn off the Power Switch at the bottom of the main unit before cleaning the robot. ■ If the vacuum cleaning robot suddenly starts to zigzag, there may be foreign substances stuck on the driving wheel. 1. When cleaning the driving wheel, ...

40_ troubleshooting CHeCkLiSt Before SVC CaLLS Symptom checklist measure to take Vacuum cleaning robot does not operate at all before cleaning. • Is the dust bin assembled? • Install the dust bin. • Is the Power Switch turned on? • Turn on the Power Switch. • Is cleaning mode in the display panel tu...

42_ troubleshooting troUBLeSHootinG for error CoDeS eRRoR code cAuSe SolutIoN • Vacuum cleaning robot is caught, stuck or trapped while navigating. • Turn off the Power Switch at the bottom and move the vacuum cleaning robot to a different location. • A foreign substance (string, paper, toy etc.) is...

product specification _43 06 pro DUC t S peC ifi C ation 80 mm (Height) 350 mm (Length) 350 mm (Width) 275 mm (Width) 161 mm (Length) 122 mm (Height) main body charger(Station) classification Item SR893* SeRIeS mechanical Specifications Diameter 350mm Height 80mm Weight 3.2kg electrical Specificatio...

open SoUrCe annoUnCement Some software components of this product incorporate source code covered under the BSD.And this software is based in part on the work of the Independent JPEG Group. ■ opencV : IMPORTANT : READ BEFORE DOWNLOADING, COPYING, INSTALLING OR USING.By downloading, copying, installi...