Samsung SR10M7030WW - Manuals

ENGLISH- 08 1 Connect the battery charger jack to the docking station 2 Connect the power cord to the battery charger When using the battery charger, the side with the sticker attached must face down. 3 Connect the power plug to the outlet Installation The docking station must be plugged in and turn...

ENGLISH- 09 Accessories or Remote control (Not included with SR10M701 ✴✴✴ Series ) Batteries (AAA type) User manual Spare filter (Option) Docking station Power cord Battery charger Boundary markers (Option) ✻ ✻ Refer to page 15 for the installation of boundary markers. Installation note Note f Insta...

ENGLISH- 11 1. SR10M701 ✴✴✴ Series If the battery indicator blinks at 0.4 sec. intervals, the POWERbot will automatically return to the docking station to be charged. 2. SR10M70 ✴✴✴✴ / SR2070 ✴✴✴✴ Series When the battery indicator blinks during cleaning, the POWERbot will return to the docking stati...

ENGLISH- 12 Using POWERbot You must turn on the emergency switch on the bottom of the unit before using POWERbot. Turning the power on/off Press the button for more than 3 seconds Starting Auto clean mode Press and release this button. The POWERbot moves and automatically cleans the set areas only o...

ENGLISH- 13 Selecting cleaning modes Cleaning mode How to select Displayed icon SR10M702 ✴✴✴ SR10M703 ✴✴✴ SR20M70 ✴✴✴✴ SR10M701 ✴✴✴ Auto clean Spot clean Repeat clean ✻ ✻ Press the [A,B type  ], [C,D type  ] on the remote controller first and then press the [Start/Stop ]. - Manual clean ✻ ✻ Manual c...

ENGLISH- 14 Cleaning method for each modes About 1.5 m Abou t 1.5 m Auto clean Automatically cleans the set areas only once. Spot clean Cleans a localized area intensely. It can be used to clean bread or cookie crumbs. Manual clean You can move POWERbot with the remote control to clean the desired s...

ENGLISH- 15 About the boundary markers To prevent the POWERbot from entering the following areas, attach the boundary markers on the floor in the shape at an interval of about 15 cm. About 15 cm Boundary markers About 5 cm About 15 cm Boundary markers where a raised spot is below 5 cm where there is...

ENGLISH- 16 Using the remote control [C Type] [D Type] 1 1 3 3 5 5 2 2 Refer to page 22 Refer to page 22 4 4 4 4 6 6 [A Type] [B Type] 1 1 1, 2 1, 2 1, 2 1, 2 3 3 5 5 Refer to page 21 Refer to page 21 2 2 4 4 VR7000_EN_DJ68-00763D-01_SA.indd 16 2017-02-03 오후 5:48:36

ENGLISH- 18 5 Manual clean mode & Direction control Move forward Select to move forward Turn left Select to turn left Turn right Select to turn right ✻ ✻ Moving backward is not available. 6 Point cleaning Available only with C, D type remote controllers. You can use the remote control to point a...

ENGLISH- 19 Name of each part 1 4 2 2 6 5 3 7 8 Top 1. Display panel2. Remote control signal receiver3. Obstacle sensor4. Dustbin5. Camera6. Dustbin button7. Bumper sensor8. Auto shutter tool 5 5 4 2 3 4 10 7 4 8 9 6 1 Bottom 1. Charge pins2. Brush3. Brush cover4. Cliff sensor5. Roller6. Battery cov...

ENGLISH- 21 Setting time/schedule [A Type, B Type] Only Auto clean mode can be scheduled. Setting the time You must set the current time before using the One-time/daily schedule. Start setting Select "Hour" Select "Minute" Select "AM/PM" Setting complete Skip to previous, nex...

ENGLISH- 23 [SR10M701 ✴✴✴ series] For the models which do not include a remote controller, schedule setting is available as below. Setting the schedule Press for 3 sec. When the schedule LED is turned on, Daily schedule is set. ✻ ✻ The time you press the button will be set as a schedule. Cleaning wi...

ENGLISH- 24 Cleaning and maintaining You must turn off the emergency switch before cleaning POWERbot. Cleaning the dustbin 1 Press the button to remove the dustbin 2 Remove the dustbin cover 3 Remove dust in the dustbin and cyclone unit 'Click' 4 Detach the cyclone unit from the dustbin cover, and t...

ENGLISH- 25 Cleaning the brush and Auto shutter tool Brush design may differ depending on the model. 1 Remove the brush cover 2 Remove the brush 3 Clean the brush 4 Clean the auto shutter tool 5 Reassemble the brush 6 Reassemble the brush cover Cleaning the Driving wheel 1 Put a soft cloth on the fl...

ENGLISH- 26 Samsung Smart Home App Samsung Smart Home App is only applicable to models supported with Wi-Fi function. Preparing the network Setting up the wireless router f This product supports only DHCP(Dynamic Host Configuration Protocol). Please check if the DHCP server option function of a wire...

ENGLISH- 27 f If the product registration is not done, please follow the following instructions: – Refer to the popup message and retry the registraion procedure. – Check if the UPnP option of the wireless router is available and retry the registration procedure. – Check if the operating mode of the...

ENGLISH- 28 Downloading Samsung Smart Home app 1. Download the Samsung Smart Home application from the Google Play Store (Android devices) or from the Apple AppStore (iOS devices). To find the app, use the keyword “Samsung Smart Home.” 2. Install the app on your smart device. Note f The Samsung Smar...

ENGLISH- 29 10. The connection between the wireless router and the robot vacuum is in progress.11. When the product registration is completed, the message will appear.12. When the product registration is completed, Robot vacuum icon is added on the device list. Main screen f Select the Robot vacuum ...

ENGLISH- 30 Charging Note f If the battery overheats during charging, it may take longer to charge. f When automatic charging is not working, do the following: – Turn the emergency switch (on the bottom of POWERbot) off and on again. – Unplug the docking station's power plug and then plug it back on...

ENGLISH- 31 f Since the brush removes dirt from the floor during cleaning, foreign matter such as thread, long hair, etc. may get caught in it. For the best cleaning results, check and clean it regularly. About the battery Note f Purchase batteries at authorized Samsung centers and check for the sym...

ENGLISH- 32 Information codes <SR10M701 ✴✴✴ series> 1 The three indicators below blink with an error alarm. 2 Turn off the emergency switch and check the below instructions and take appropriate action 3 Information code will disappear when you turn on the emergency switch Information codes Che...

ENGLISH- 34 Troubleshooting Symptom Checklist The POWERbot is not working at all. f Check if the emergency switch is on. f Check if all the icons are displayed on the display panel. f Check if the POWERbot's battery is depleted. – When "Lo" is displayed, place the POWERbot on the docking sta...

ENGLISH- 36 Open Source Announcement The software included in this product contains open source software. You may obtain the complete corresponding source code for a period of three years after the last shipment of this product by sending an email to mailto:[email protected]. It is also possible to ...

ENGLISH- 37 Specifications <SR10M70 ✴✴✴✴ series> Classification Item Detail information SR10M701 ✴✴✴ SR10M702 ✴✴✴ SR10M703 ✴✴✴ Mechanical specifications (POWERbot) Size (D x H x L) 340 mm x 97 mm x 348 mm Weight 4 kg Sensor Ceiling shape recognition (Visionary mapping plus TM) Button type of P...

ENGLISH- 38 Memo VR7000_EN_DJ68-00763D-01_SA.indd 38 2017-02-03 오후 5:48:44