ResMed HumidAire 2i - Manual
ResMed HumidAire 2i – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Clinical Use Only; ResMed HumidAire 2i – Disinfection Guide; WARNINGS and CAUTIONS
- Page 3 – ResMed Validated Procedures; Pre-cleaning must occur immediately after use.; Ensure that the machine has thoroughly rinsed each component.
- Page 5 – Disassembling and Reassembling the HumidAire 2i; WARNING; Allow 10 minutes for the tub plate and any excess water to cool.; Disassembling the Water Chamber; To open the side catches pull out from the lower edge.
- Page 6 – Reassembling the Water Chamber
- Page 7 – Take the assembled catches and fit them to the water chamber base.; CAUTION; Ensure that you replace the O-ring if it is nicked or punctured.
- Page 8 – Lock the catches on the side of the water chamber.; Troubleshooting; Possible cause
Clinical Use Only
1
HumidAire 2i
™
HEATED HUMIDIFIER
Disinfection Guide
English
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Clinical Use Only 2 ResMed HumidAire 2i – Disinfection Guide This Disinfection Guide is intended for multipatient use of the HumidAire 2i in a sleep lab, clinic or hospital. If you use the water chamber as a single user in the home, refer to the User Guide for cleaning instructions. The following ar...
Clinical Use Only 3 ResMed Validated Procedures Table 1: Option 1 (Automatic Cleaning and High-Level Thermal Disinfection) Option 1 (Automatic Cleaning and High-Level Thermal Disinfection) Disassembly Disassemble the humidifier water chamber according to the “Disassembling and Reassembling” instruct...
Clinical Use Only 5 Disassembling and Reassembling the HumidAire 2i WARNING Beware of electrocution. Do not immerse the device or power cord in water. Always unplug the device before cleaning and be sure that it is dry before plugging back in. 1 Turn the main power switch at the back of the device t...
