ResMed 628035 - Manual - manualsarea.com

Page 5 - iv

Page 8 - Swift; Thank you for choosing the SwiftFX Nano / SwiftFX Nano for Her.; Intended Use; The Swift FX Nano / Swift FX Nano for Her channels airflow; GENERAL WARNINGS; The vent holes must be kept clear.

English 1 English Swift ™ FX Nano Swift ™ FX Nano for Her N ASAL M ASK Thank you for choosing the SwiftFX Nano / SwiftFX Nano for Her. Please read the entire manual before use. Intended Use The Swift FX Nano / Swift FX Nano for Her channels airflow noninvasively to a patient from a continuous positi...

Page 10 - English; Using your mask; Products; page under; Fitting; Fitting steps; Adjust the mask cushion until it sits comfortably on your nose.

English 3 Using your mask When using your mask with ResMed CPAP or bilevel devices that have mask setting options, refer to the Technical specifications section in this user guide for mask selection options. For a full list of compatible devices for this mask, see the Mask/Device Compatibility List ...

Page 11 - Disassembly steps; Peel the mask cushion away from the swivel ring.; Reassembly; Reassembly steps; Rotate the elbow to ensure it moves freely in the swivel ring.

4 Removing your mask To remove your mask pull the mask and headgear by the fabric back strap up and over your head. Disassembly Refer to the disassembly illustrations in this user guide. A diagram showing the names of parts can be found in the Mask Components diagram near the beginning of this guide...

Page 12 - Cleaning your mask in your home; Your mask and headgear should only be handwashed by gently; WARNING

English 5 6. Repeat the previous step with the other headgear arm. Ensure that the headgear straps are not twisted. 7. Thread the fabric back strap through each side of the headgear, then fold over to secure. Ensure that the fastener is on the outside with the ResMed logo facing out. Cleaning your m...

Page 13 - Reprocessing the mask between patients; This mask should be reprocessed when used between patients.; Troubleshooting; Problem/possible cause; Elbow inserted incorrectly.

6  If the vent or rotating parts such as the swivel, swivel ring or ball joint require cleaning, use a soft bristle brush. Weekly:  Handwash the headgear. It may be washed without being disassembled. Reprocessing the mask between patients This mask should be reprocessed when used between patients....

Page 14 - Mask leaks around face.

English 7 Problem/possible cause Solution Mask leaks around face. Mask is not positioned correctly. Check that the ResMed logo is facing upward on the top of the cushion across the bridge of your nose. Mask may have been fitted incorrectly. Pull the mask away from your face and reposition, ensuring ...

Page 15 - Mask does not fit properly.; Technical Specifications; The mask contains passive venting to protect

8 Problem/possible cause Solution Mask does not fit properly. Mask is incorrectly assembled. Disassemble the mask, then reassemble according to the instructions. Ensure that the swivel ring on the elbow has not been inserted too far into the cushion. Check that the printing on the left headgear stra...

Page 16 - Storage; This mask does not contain any hazardous substances and may be

English 9 Environmental conditions Operating temperature: +5°C to +40°C Operating humidity: 15% to 95% relative humidity non-condensing Storage and transport temperature: -20°C to +60°C Storage and transport humidity: 15% to 95% relative humidity non-condensing Sound DECLARED DUAL-NUMBER NOISE EMISS...

Page 21 - Global leaders in sleep and respiratory medicine; Swift FX Nano; Swift FX Nano for Her; EUR1 Eng

Global leaders in sleep and respiratory medicine www.resmed.com Swift FX Nano TM NASAL MASK 628035/2 2013-01 Swift FX Nano / Swift FX Nano for Her USER EUR1 Eng 1 3 5 2 4 6 628035

ResMed 628035 - Manual

Table of Contents:

Summary

Other ResMed Models