ResMed 368882/1 2012-11 H5i - Manual
ResMed 368882/1 2012-11 H5i – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – H5i at a glance; The H5i system comprises the following elements:; Travelling tips; Welcome
- Page 4 – Setup; Connect the DC plug of the power supply unit to the rear of the S9.
- Page 5 – Filling the water tub; Slide the latch and lift open the flip lid.
- Page 6 – S9 basics; The control panel of your S9 device includes an; Setup menu
- Page 7 – Adjusting humidity level; In order to assist the heater plate in cooling, your S9 device will
- Page 8 – Getting started; If your clinician has enabled SmartStart your device will start
- Page 9 – Cleaning and maintenance; Disassembling the H5i; Lift open the flip lid.
- Page 12 – WELCOME; heated humidifier; Welcome Guide; English • Deutsch • Français • Italiano •
Global leaders in sleep and respirator y medicine
w w w.resmed.com
368882/1 2012-11
H5i
WELCOME
EUR 1/3
H5i
™
heated humidifier
Welcome Guide
English
Manufacturer:
ResMed Ltd
1 Elizabeth Macarthur Drive Bella Vista NSW 2153 Australia.
Distributed by:
ResMed Corp
9001 Spectrum Center
Boulevard San Diego CA 92123 USA.
ResMed (UK) Ltd
96 Milton Park Abingdon Oxfordshire OX14 4RY UK. See www.resmed.com for other
ResMed locations worldwide.
For patent information, see www.resmed.com/ip.
H5i is a trademark of ResMed Ltd and is registered in U.S. Patent and Trademark Office.
© 2012 ResMed Ltd.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
H5i at a glance The H5i system comprises the following elements: • H5i heated humidifier • H5i Cleanable water tub.Optional components include: • ClimateLine heated tubing • ClimateLine MAX heated tubing • H5i water tub. Travelling tips When moving or travelling with your H5i: • Ensure that the wate...
Setup 1. Align your H5i with your S9 and push them together until they click into place. 2. Connect the DC plug of the power supply unit to the rear of the S9. 3. Connect the power cord to the power supply unit. 4. Plug the other end of the power cord into the power outlet. 5. Connect one end of the...
Filling the water tub 1. Slide the latch and lift open the flip lid. 2. Remove the water tub. 3. Fill the water tub (through the centre hole) with water up to the maximum water level mark (380 mL). 4. Return the water tub to the H5i. 5. Close the flip lid ensuring that it clicks into place. 1. 2. 3....
