Philips HX6711/02 - User Manual

I UV sanitizer with integrated charger and cord wrap - Not shown: UV light bulb - Not shown: Sanitizer drip tray - Not shown: Protective screen for UV light bulb Note: The contents of the box vary based on model purchased getting started Changing the color code ring Sonicare brush heads come with in...

Charging your sonicare 1 Plug the charger into a live outlet. 2 Place the handle on the charger. , The battery charge indicator next to the battery symbol flashes to indicate that the toothbrush is charging. Battery charge indicator The batter y charge indicator shows the approximate remaining batte...

Using your sonicare Brushing instructions 1 Wet the bristles and apply a small amount of toothpaste. 2 Place the toothbrush bristles against the teeth at a slight angle towards the gumline. 3 Press the power on/off button to turn on the Sonicare. 4 Apply light pressure to maximize Sonicare’s effecti...

Your Sonicare is safe to use on: - Braces (brush heads wear out sooner when used on braces) - Dental restorations (fillings, crowns, veneers) Note: The toothbrush may be turned off at any time by pressing and holding the power on/off button for 2 seconds.Clean and White mode brushing instructions Th...

Clean mode Standard mode for superior teeth cleaning. sensitive mode (select models) Gentle, yet thorough cleaning for sensitive gums and teeth. Clean and White mode 2 minutes of Clean mode, with an additional 30 seconds of White mode to focus on your visible front teeth. Note: When Sonicare is used...

- When you use the Clean and White mode, you hear and feel a change in the brush head sound and motion after 2 minutes of Clean mode. Then move the brush head to the visible top front teeth and brush them for 15 seconds. At the final beep and pause, move to the visible bottom teeth and brush them fo...

3 Place the brush head on one of the 2 pegs in the sanitizer. Note: Only clean Sonicare ProResults brush heads in the sanitizer. Make sure the bristles of the brush head directly face the light bulb. 4 Make sure the sanitizer is plugged into a live outlet of appropriate voltage. 5 Close the door and...

2 Use a damp cloth to wipe the entire surface of the handle. Brush head 1 Rinse the brush head and bristles after each use. 2 Remove the brush head from the handle and rinse the brush head connection at least once a week with warm water. Charger 1 Unplug the charger before cleaning. 2 Use a damp clo...

To remove the light bulb, grasp it and pull it out of the metal clasp. 6 Clean the protective screen and the UV light bulb with a damp cloth. 7 Reinsert the UV light bulb. To reinser t the light bulb, align the bottom of the light bulb with the metalclasp and push the bulb into the clasp. 8 Reinsert...

2 Insert a screwdriver into the slot located at the bottom of the handle and turn counterclockwise to release the bottom cap. 3 Hold the handle upside down and push down on the shaft to release the internal components of the handle. 4 Insert the screwdriver under the circuit board, next to the batte...

Frequently asked questions This chapter lists the questions most frequently asked about the appliance. If you cannot find the answer to your question, contact the Customer Care Center in your countr y. Question Answer Why doesn’t the Sonicare work? You may need to recharge the Sonicare. Charge the S...