Patton 4950 - Manual

Patton 4950

Patton 4950 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
Page: / 12

Table of Contents:

  • Page 2 – SmartNode 4950 Series Quick Start Guide; • Do not open the device when the power cord is connected. For sys-; Limited Power Source; The mains outlet that is utilized to; WARNING
  • Page 3 – Power up the SmartNode; Wait until the; Connecting the SmartNode to your laptop PC; • Wear an ESD-preventive wrist strap, ensuring that it makes good; CAUTION
  • Page 4 – Connect the PC’s Ethernet port to; figure 1; Check the connection to the SmartNode by executing the; Configuring the desired IP address; table 1; provides a default DHCP; “Connecting the SmartNode to the; Factory default IP address and network mask configuration; Item; DHCP
  • Page 5 – administrator; enable; Changing the WAN IP address; context IP; context ip router; Note; interface WAN; Connecting the SmartNode to the network
  • Page 6 – In general, the SmartNode will connect to the network via the; figure 2; Connecting the SmartNode to the network; If the WAN address is; node; SmartNode Series SmartWare Software Configuration Guide
  • Page 7 – resides in the root directory of the TFTP server.; config; Additional Information; available online at; IMPORTANT
  • Page 8 – A.0 Customer and Technical Support; with a VoIP SIP client; B.0 Compliance Information; PSTN Regulatory Compliance:
  • Page 9 – B.2 Radio and TV interference
  • Page 10 – B.5 EC Declaration of Conformity; The signed Declaration of Conformity can be downloaded from; B.5 “EC Declaration of Conformity”; for English version); Produktbezeichnung; Anerkennung ihrer Konformität.
  • Page 11 – Copyright statement; The term
  • Page 12 – Notes
Loading the manual

SmartNode 4950 Series

Multi-Port T1/E1/PRI VoIP

Enterprise Gateway Router

Quick Start Guide

Part Number:

07MSN4950-QS, Rev. B

Revised:

February 7, 2012

Sales Office: +1 (301) 975-1000

Technical Support: +1 (301) 975-1007

E-mail: [email protected]

WWW: www.patton.com

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - SmartNode 4950 Series Quick Start Guide; • Do not open the device when the power cord is connected. For sys-; Limited Power Source; The mains outlet that is utilized to; WARNING

2 SmartNode 4950 Series Quick Start Guide • Do not open the device when the power cord is connected. For sys- tems without a power switch and without an external power adapter, line voltages are present within the device when the power cord is connected. • For devices with an external power adapter,...

Page 3 - Power up the SmartNode; Wait until the; Connecting the SmartNode to your laptop PC; • Wear an ESD-preventive wrist strap, ensuring that it makes good; CAUTION

SmartNode 4950 Series Quick Start Guide 3 1.0 Power up the SmartNode 1. Insert the barrel type connector end of the AC power cord into the external power supply connector. 2. Insert the female end of the power cord into the internal power supply connector. 3. Verify that the AC power cord included w...

Page 4 - Connect the PC’s Ethernet port to; figure 1; Check the connection to the SmartNode by executing the; Configuring the desired IP address; table 1; provides a default DHCP; “Connecting the SmartNode to the; Factory default IP address and network mask configuration; Item; DHCP

4 SmartNode 4950 Series Quick Start Guide Figure 1. Connecting to the PC 1. Connect the PC’s Ethernet port to LAN (ETH 0/1) port of the SmartNode 4950. The SmartNode 4950 Series is equipped with Auto-MDX Ethernet ports, so you can use straight-through or cross-over Ethernet cables for host or hub/sw...

Other Patton Models

All Patton Other