Patton 4950 - Manuals - manualsarea.com

Page 2 - SmartNode 4950 Series Quick Start Guide; • Do not open the device when the power cord is connected. For sys-; Limited Power Source; The mains outlet that is utilized to; WARNING

2 SmartNode 4950 Series Quick Start Guide • Do not open the device when the power cord is connected. For sys- tems without a power switch and without an external power adapter, line voltages are present within the device when the power cord is connected. • For devices with an external power adapter,...

Page 3 - Power up the SmartNode; Wait until the; Connecting the SmartNode to your laptop PC; • Wear an ESD-preventive wrist strap, ensuring that it makes good; CAUTION

SmartNode 4950 Series Quick Start Guide 3 1.0 Power up the SmartNode 1. Insert the barrel type connector end of the AC power cord into the external power supply connector. 2. Insert the female end of the power cord into the internal power supply connector. 3. Verify that the AC power cord included w...

Page 4 - Connect the PC’s Ethernet port to; figure 1; Check the connection to the SmartNode by executing the; Configuring the desired IP address; table 1; provides a default DHCP; “Connecting the SmartNode to the; Factory default IP address and network mask configuration; Item; DHCP

4 SmartNode 4950 Series Quick Start Guide Figure 1. Connecting to the PC 1. Connect the PC’s Ethernet port to LAN (ETH 0/1) port of the SmartNode 4950. The SmartNode 4950 Series is equipped with Auto-MDX Ethernet ports, so you can use straight-through or cross-over Ethernet cables for host or hub/sw...

Page 5 - administrator; enable; Changing the WAN IP address; context IP; context ip router; Note; interface WAN; Connecting the SmartNode to the network

SmartNode 4950 Series Quick Start Guide 5 3.2 Login 1. To access the SmartNode, start the Telnet application on your PC. Type the default IP address into the address field: 192.168.1.1 . Accessing your SmartNode via a Telnet session displays the login screen. Type the factory default login: administ...

Page 6 - In general, the SmartNode will connect to the network via the; figure 2; Connecting the SmartNode to the network; If the WAN address is; node; SmartNode Series SmartWare Software Configuration Guide

6 SmartNode 4950 Series Quick Start Guide In general, the SmartNode will connect to the network via the WAN (ETH 0/0) port. This enables the SmartNode to offer routing services to the PC hosts on LAN (ETH 0/1) port. The SmartNode 4950 Series provides an auto- MDX feature for both Ethernet ports, so ...

Page 7 - resides in the root directory of the TFTP server.; config; Additional Information; available online at; IMPORTANT

SmartNode 4950 Series Quick Start Guide 7 In this example we assume an TFTP server resides on the host with the IP address 172.16.1.11 and the configu-ration file named SN.cfg resides in the root directory of the TFTP server. 172.16.1.99(if-ip)[WAN]# copy tftp://172.16.1.11/SN.cfg startup- config Do...

Page 8 - A.0 Customer and Technical Support; with a VoIP SIP client; B.0 Compliance Information; PSTN Regulatory Compliance:

8 SmartNode 4950 Series Quick Start Guide A.0 Customer and Technical Support Toll-Free VoIP support: call sip:[email protected] with a VoIP SIP client Online support: www .patton.com E-mail support: [email protected] —answered within 1 business day Telephone support: • Standard: +1 (301) 975-1007 ...

Page 9 - B.2 Radio and TV interference

SmartNode 4950 Series Quick Start Guide 9 B.2 Radio and TV interference The SmartNode router generates and uses radio frequency energy, and if not installed and used properly—that is, in strict accordance with the manufacturer’s instructions—may cause interference to radio and television reception. ...

Page 10 - B.5 EC Declaration of Conformity; The signed Declaration of Conformity can be downloaded from; B.5 “EC Declaration of Conformity”; for English version); Produktbezeichnung; Anerkennung ihrer Konformität.

10 SmartNode 4950 Series Quick Start Guide Repairs to some certified equipment should be made by an authorized maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to r...

Page 11 - Copyright statement; The term

SmartNode 4950 Series Quick Start Guide 11 Copyright statement Copyright © 2012, Patton Electronics Company. All rights reserved.The information in this document is subject to change without notice. Patton Electronics assumes no liability for errors that may appear in this document. Trademarks state...

Page 12 - Notes

12 SmartNode 4950 Series Quick Start Guide Notes ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________...