Patton 3201 - Manual
Patton 3201 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Power up the router; External AC adaptor with included power cord; Models with external AC adaptor; Connect female plug of the AC power cord to the AC adaptor provided.; Do not work on the system or connect or disconnect cables; WARNING
- Page 3 – 8VDC power supply; Models with external DC power supply; Power; Configure the IP address; Ethernet; Terminal
- Page 4 – Connect a PC and log in; Console; figure 2; Connecting DiamondLink to the PC’s serial port; Modify the IP address; Display current IP interface settings for the DiamondLink; Note; The above IP address (; Verify the new address is correct and save it in system boot memory.; Connect to Console port
- Page 5 – Connect to the local IP network; figure 3; the MDI-X switch until the; Connecting the DiamondLink to the local IP network; from; Log onto the web management interface; “Modify the IP address”; Log in to the web management home page using the username; DiamondLink web management home page; Connect to Ethernet port
- Page 6 – Additional Information; DiamondLink User Manual; A.0 Customer and Technical Support
- Page 7 – B.0 Compliance Information
- Page 8 – The signed Declaration of Conformity can be downloaded from
- Page 9 – B.6 Authorized European Representative
- Page 10 – The term
DiamondLink™ Model 3201 & 3241
G.SHDSL Router
Quick Start Guide
Important
—This is a Class A device and is intended for use in a light industrial environment. It is not
intended nor approved for use in an industrial or residential environment.
Document Number: 03321U7-001 Rev. B
Part Number: 07M3201-QS
Revised: October 15, 2008
Sales Office: +1 (301) 975-1000
Technical Support: +1 (301) 975-1007
E-mail: [email protected]
WWW: www.patton.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 DiamondLink 3201 & 3241 Quick Start Guide 1.0 Power up the router Your G.SHDSL router comes with one of the following power supply options: • External AC adaptor with included power cord • External DC power supply 1.1 Models with external AC adaptor 1. Connect female plug of the AC power cord ...
DiamondLink 3201 & 3241 Quick Start Guide 3 Figure 1. 48VDC power supply 1.2 Models with external DC power supply 1. Strip insulation 1/4-inch from the electrical wires that will connect the DC power source to the 48VDC power supply terminal block (see figure 1 ). 2. Connect the negative (-) ter...
4 DiamondLink 3201 & 3241 Quick Start Guide 2.1 Connect a PC and log in 1. Using the included combination RS232/Ethernet cable and DB9-RJ45 adapter, connect a PC’s serial port to the on the DiamondLink’s (red) Console port (see figure 2 ). Figure 2. Connecting DiamondLink to the PC’s serial port...
