Patton 10200 - Manual
Patton 10200 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – WARNING
- Page 3 – SmartNode 10200 Series Quick Start Guide; Before you begin
- Page 4 – Connecting to the VoIP Network; Note; Connecting the VoIP ports; Connecting to the PSTN Network; Connect the SN10200 to the PSTN, using one of the following options:; VoIP Ports
- Page 6 – Connecting to the power source; Verify that the Power LED on the front panel is a Solid Green.; Connecting the power source; Connecting to the Control host; Connect to the Control host through the console serial port (see; “Connecting the console serial; on page 7) OR the Ethernet management interface (see; agement interface”; The IP address of the management port is; Audible
- Page 7 – Connecting the console serial port; Connecting the Ethernet management interface; Connecting the management interface; Configuring the SmartNode; “Accessing the SmartNode via the Console Management port”; on page 8; on page 8
- Page 8 – Accessing the SmartNode via the Console Management port; Baud rate; None
- Page 9 – Logging into the Web Interface; “Accessing the SmartNode via the Ethernet Management; Default password: root; Additional Information; Refer to the following manuals
- Page 10 – A.0 Compliance Information; A.3 CE Declaration of Conformity
- Page 11 – B.0 Customer and Technical Support; with a VoIP SIP client
- Page 12 – Copyright statement; The term; Warranty; For warranty information, refer to the
SmartNode™ 10200 Series
TDM+VoIP Smart Media Gateway
Quick Start Guide
Important
—This is a Class A device and is not intended for use in a residential environment.
Part Number: 07MSN10200-QS, Rev. D
Revised: May 7, 2012
Sales Office: +1 (301) 975-1000
Technical Support: +1 (301) 975-1007
E-mail: [email protected]
www.patton.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 SmartNode 10200 Series Quick Start Guide • Do not open the device when the power cord is connected. For sys- tems without a power switch and without an external power adapter, line voltages are present within the device when the power cord is connected. • For devices with an external power adapter...
SmartNode 10200 Series Quick Start Guide 3 1.0 Before you begin In the box, you will find: • One SmartNode 10200 • One set of mounting brackets with screws • One DB-9 to RJ-45 adapter SCSI Cables and Patch Panels, if applicable • Three RJ45 Ethernet Straight Cables (male-male) • One warranty sheet •...
4 SmartNode 10200 Series Quick Start Guide 3.0 Connecting to the VoIP Network 1. Connect the VoIP Ports 0/1 and 0/1 to your network. Note Ethernet ports (ETH 0/0 & 0/1), and SMS ports (SMS-0/0 & 0/1) are not used when connecting VoIP. Figure 2. Connecting the VoIP ports 4.0 Connecting to the...
