Patton 3201 - Manuals - manualsarea.com

Page 2 - Power up the router; External AC adaptor with included power cord; Models with external AC adaptor; Connect female plug of the AC power cord to the AC adaptor provided.; Do not work on the system or connect or disconnect cables; WARNING

2 DiamondLink 3201 & 3241 Quick Start Guide 1.0 Power up the router Your G.SHDSL router comes with one of the following power supply options: • External AC adaptor with included power cord • External DC power supply 1.1 Models with external AC adaptor 1. Connect female plug of the AC power cord ...

Page 3 - 8VDC power supply; Models with external DC power supply; Power; Configure the IP address; Ethernet; Terminal

DiamondLink 3201 & 3241 Quick Start Guide 3 Figure 1. 48VDC power supply 1.2 Models with external DC power supply 1. Strip insulation 1/4-inch from the electrical wires that will connect the DC power source to the 48VDC power supply terminal block (see figure 1 ). 2. Connect the negative (-) ter...

Page 4 - Connect a PC and log in; Console; figure 2; Connecting DiamondLink to the PC’s serial port; Modify the IP address; Display current IP interface settings for the DiamondLink; Note; The above IP address (; Verify the new address is correct and save it in system boot memory.; Connect to Console port

4 DiamondLink 3201 & 3241 Quick Start Guide 2.1 Connect a PC and log in 1. Using the included combination RS232/Ethernet cable and DB9-RJ45 adapter, connect a PC’s serial port to the on the DiamondLink’s (red) Console port (see figure 2 ). Figure 2. Connecting DiamondLink to the PC’s serial port...

Page 5 - Connect to the local IP network; figure 3; the MDI-X switch until the; Connecting the DiamondLink to the local IP network; from; Log onto the web management interface; “Modify the IP address”; Log in to the web management home page using the username; DiamondLink web management home page; Connect to Ethernet port

DiamondLink 3201 & 3241 Quick Start Guide 5 3.0 Connect to the local IP network Now you can connect the DiamondLink to your local IP network and complete the remaining configuration from your PC using a standard web browser. Connect the DiamondLink’s (green) Ethernet port to the same Ethernet se...

Page 6 - Additional Information; DiamondLink User Manual; A.0 Customer and Technical Support

6 DiamondLink 3201 & 3241 Quick Start Guide 5.0 Connect the G.SHDSL port 1. Obtain single-twisted-pair cable with an RJ-11 plug connector at each end. 2. Plug one end of the cable into the RJ-11socket (yellow colored port labeled LINE ) on the DiamondLink Router. 3. Plug the other end of the cab...

Page 7 - B.0 Compliance Information

DiamondLink 3201 & 3241 Quick Start Guide 7 B.0 Compliance Information B.1 Compliance EMC: • FCC Part 15, Class A • EN55022, Class A • EN55024 Safety: • UL 60950-1/CSA C22.2 N0. 60950-1 • IEC/EN60950-1 • AS/NZS 60950-1 PSTN Regulatory: • FCC Part 68 • CS-03 • AS/ACIF S043:2003 B.2 FCC Part 68 (A...

Page 8 - The signed Declaration of Conformity can be downloaded from

8 DiamondLink 3201 & 3241 Quick Start Guide 2.3 Industry Canada Notice This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is con-firmed by the registration number. The abbreviation, IC, before the registration number signifies that registra-tion...

Page 9 - B.6 Authorized European Representative

DiamondLink 3201 & 3241 Quick Start Guide 9 B.6 Authorized European Representative D R M GreenEuropean Compliance Services Limited.Avalon House, Marcham Road Abingdon,Oxon OX14 1UD, UK

Page 10 - The term

10 DiamondLink 3201 & 3241 Quick Start Guide Copyright statement Copyright © 2008, Patton Electronics Company. All rights reserved.The information in this document is subject to change without notice. Patton Electronics assumes no liability for errors that may appear in this document. Trademarks...