Patton 10200 - Manuals - manualsarea.com

Page 2 - WARNING

2 SmartNode 10200 Series Quick Start Guide • Do not open the device when the power cord is connected. For sys- tems without a power switch and without an external power adapter, line voltages are present within the device when the power cord is connected. • For devices with an external power adapter...

Page 3 - SmartNode 10200 Series Quick Start Guide; Before you begin

SmartNode 10200 Series Quick Start Guide 3 1.0 Before you begin In the box, you will find: • One SmartNode 10200 • One set of mounting brackets with screws • One DB-9 to RJ-45 adapter SCSI Cables and Patch Panels, if applicable • Three RJ45 Ethernet Straight Cables (male-male) • One warranty sheet •...

Page 4 - Connecting to the VoIP Network; Note; Connecting the VoIP ports; Connecting to the PSTN Network; Connect the SN10200 to the PSTN, using one of the following options:; VoIP Ports

4 SmartNode 10200 Series Quick Start Guide 3.0 Connecting to the VoIP Network 1. Connect the VoIP Ports 0/1 and 0/1 to your network. Note Ethernet ports (ETH 0/0 & 0/1), and SMS ports (SMS-0/0 & 0/1) are not used when connecting VoIP. Figure 2. Connecting the VoIP ports 4.0 Connecting to the...

Page 6 - Connecting to the power source; Verify that the Power LED on the front panel is a Solid Green.; Connecting the power source; Connecting to the Control host; Connect to the Control host through the console serial port (see; “Connecting the console serial; on page 7) OR the Ethernet management interface (see; agement interface”; The IP address of the management port is; Audible

6 SmartNode 10200 Series Quick Start Guide 5.0 Connecting to the power source 1. Connect to two independent power sources (if only one power source is used, press the green button at the rear of the unit to disable the audible alarm). 2. Verify that the Power LED on the front panel is a Solid Green....

Page 7 - Connecting the console serial port; Connecting the Ethernet management interface; Connecting the management interface; Configuring the SmartNode; “Accessing the SmartNode via the Console Management port”; on page 8; on page 8

SmartNode 10200 Series Quick Start Guide 7 6.1 Connecting the console serial port 1. Connect a CAT5 RJ-45 (male-male) cable (supplied with unit) between the COM port of your computer and the serial port (labeled 1010) of the SN10200. 2. If your computer’s serial port features a DB9 connector, use th...

Page 8 - Accessing the SmartNode via the Console Management port; Baud rate; None

8 SmartNode 10200 Series Quick Start Guide 7.1 Accessing the SmartNode via the Console Management port Logging into the SmartNode Console 1. To physically connect the console serial port, follow the instructions in 6.1 “Connecting the console serial port” on page 7. 2. To communicate with the SN1020...

Page 9 - Logging into the Web Interface; “Accessing the SmartNode via the Ethernet Management; Default password: root; Additional Information; Refer to the following manuals

SmartNode 10200 Series Quick Start Guide 9 8.0 Logging into the Web Interface This section describes how to login and navigate the SmartNode 10200 Web Portal.The first step involved in initially configuring any Smart Media system involves logging on to the Web Portal. This can be divided into two di...

Page 10 - A.0 Compliance Information; A.3 CE Declaration of Conformity

10 SmartNode 10200 Series Quick Start Guide A.0 Compliance Information A.1 Compliance EMC: • FCC Part 15, Class A • EN55022, Class A • EN ETSI 300 386 V1.3.3 Low-Voltage Directive (Safety): • UL 60950-1/CSA C22.2 No. 60950-1 • IEC/EN60950-1 A.2 Radio and TV Interference (FCC Part 15) This device gen...

Page 11 - B.0 Customer and Technical Support; with a VoIP SIP client

SmartNode 10200 Series Quick Start Guide 11 B.0 Customer and Technical Support Toll-Free VoIP support: call sip:[email protected] with a VoIP SIP client Online support: www .patton.com E-mail support: [email protected] —answered within 1 business day Telephone support: • Standard: +1 (301) 975-100...

Page 12 - Copyright statement; The term; Warranty; For warranty information, refer to the

12 SmartNode 10200 Series Quick Start Guide Copyright statement Copyright © 2012, Patton Electronics Company. All rights reserved.The information in this document is subject to change without notice. Patton Electronics assumes no liability for errors that may appear in this document. Trademarks stat...