Parkside PLBS 30 - Manual - manualsarea.com

Page 4 - Table of contents

5 GB/IE/CY Introduction Proper use ...............................................................................Page 7Features and equipment .........................................................Page 8Included items .........................................................................Page 8...

Page 5 - Introduction; Read instruction manual!

6 GB/IE/CY Introduction The following pictograms are used in these operating instructions / on the device: Read instruction manual! Observe caution and safety notes! Caution – electric shock! Danger to life! Risk of explosion! Risk of ﬁre! Warning - Hot surfaces! V~ Volt (AC) W Watts (Eﬀective power...

Page 6 - Please make sure you familiarise yourself fully with the way; Proper use

7 GB/IE/CY Introduction Do not eat! Do not drink! Dispose packaging and appliance in an environmentally-friendly way! Soldering iron with holder Introduction Please make sure you familiarise yourself fully with the way the device works before you use it for the ﬁrst time and that you understand how ...

Page 8 - Keep your working area clean and well lit.; Electrical safety; To avoid danger to life from electric shock:

9 GB/IE/CY Safety advice Safety advice CAUTION! Failure to observe the instructions and advice given below may result in electric shock, ﬁre and/or serious injury. 1. Workplace safety a) Keep your working area clean and well lit. Untidy or poorly lit working areas can lead to accidents. b) Do not wo...

Page 9 - Safety advice

10 GB/IE/CY Safety advice c) Use a residual current device (RCD) for protection if operating the electrical power tool in a moist envi-ronment is unavoidable. The use of an RCD reduces the risk of electric shock. d) Do not use the mains lead for any purpose for which it was not intended, e.g. to car...

Page 15 - Operation / Maintenance and cleaning; Universal attachment; Maintenance and cleaning

16 GB/IE/CY Operation / Maintenance and cleaning You can fashion and decorate various materials with your soldering pencil. Remove the parts of the surface or engrave design elements into it (see Fig. D).You can carry out these decorations in, for example, wood, leather, paper, papier mâché, smooth ...

Page 16 - Have your device repaired only by; Warranty

17 GB/IE/CY Service centre / Warranty Service centre WARNING! Have your device repaired only by qualified specialist personnel using original manu -facturer parts only. This will ensure that your device remains safe to use. WARNING! If the plug or mains lead needs to be replaced, always have the rep...

Page 17 - Disposal; The packaging and ancillary packing consist wholly of

18 GB/IE/CY Warranty / Disposal made unter warranty. This applies also to replaced and repaired parts. Any damage and defects extant on purchase must be reported imme-diately after unpacking the appliance, at the latest, two days after the purchase date. Repairs made after the expiration of the warr...

Page 18 - Soldering iron with holder

19 GB/IE/CY Disposal / Declaration of conformity / Producer Contact your local refuse disposal authority for more details of how to dispose of your worn-out devices. Declaration of conformity / Producer We, Kompernaß GmbH, the person responsible for documents: Mr Dennis Dohm, Burgstr. 21, D-44867 Bo...

Parkside PLBS 30 - Manual

Table of Contents:

Summary

Other Parkside Models