Parkside PSS 250 - Manuals - manualsarea.com

Page 4 - Table of contents

5 GB/IE/CY Table of contents Introduction Intended use ..................................................................................................................Page 6Features........................................................................................................................

Page 5 - Introduction; Orbital sander PSS 250

6 GB/IE/CY Introduction Orbital sander PSS 250 Q Introduction Before using the appliance for the first time familiarize yourself with all functions of the appliance and inform yourself about the correct handling of electrical tools. Please read the following operating instructions carefully. Retain ...

Page 6 - Introduction / General safety advice for electrical power tools; Technical Data; Noise and vibration data:; General safety advice for; read all the safety advice; Workplace safety; To avoid danger to life from

7 GB/IE/CY Introduction / General safety advice for electrical power tools Q Technical Data Nominal voltage: 230 V ~ 50 Hz Nominal power: 250 W Idle speed: n 0 7.000 - 12.000 rpm Idle oscillation speed: n 0 14.000 - 24.000 rpm Sanding sheet dimensions: Hook and loop fastening 93 x 185 mm Clamp faste...

Page 7 - General safety advice for electrical power tools; Wear suitable clothing. Do not wear; Careful handling and use

8 GB/IE/CY General safety advice for electrical power tools b) avoid touching earthed surfaces such as pipes, radiators, ovens and refrig-erators with any part of your body. There is an increased risk of electric shock if your body is earthed. c) Keep the device away from rain or moisture. Water ent...

Page 8 - appliance-specific

9 GB/IE/CY General safety advice for electrical power tools d) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are da...

Page 9 - Operation; General safety advice for electrical power tools / Operation

10 GB/IE/CY Operation a stop before setting down the oscil-lating sander. J always pull the power plug out of the socket for all work pauses, before any work on the appliance (e.g. changing the sanding paper) and when not in use. J The appliance must always be kept clean, dry and free of oil or lubr...

Page 10 - Instructions, tips and tricks

11 GB/IE/CY metals or metal objects left in wood. This can hap-pen especially if the wood dust has paint particles on it or is mixed with other chemical substances and the sanded material is hot after extensive working. You should therefore avoid overheating of products being sanded as well as the a...

Page 11 - Have your device; Warranty; IE; Disposal; Maintenance and cleaning / Service centre / Warranty / Disposal

12 GB/IE/CY Q Maintenance and Cleaning WarNING! DaNGEr OF INJUry! Before performing any work on the appliance, disconnect the power plug. j Clean the appliance regularly, preferably always immediately after use. j Do not use any sharp objects for cleaning the appliance. Never permit fluids to permea...

Page 12 - Disposal / Conformity Declaration / Manufacturer; Conformity Declaration /

13 GB/IE/CY Disposal / Conformity Declaration / Manufacturer tools must be collected separately and subjected to an environmentally friendly recycling procedure. Your local communal or municipal authorities can provide information on how to dispose of the worn-out appliance. Q Conformity Declaration...