Parkside PEBS 900 SE - Manual

Page 4 - Table of contents

5 GB/IE/CY Table of contents Introduction Proper use ......................................................................................................................Page 6Features and equipment ...............................................................................................Page ...

Page 5 - Introduction; Belt sander PEBS 900 SE

6 GB/IE/CY Introduction Belt sander PEBS 900 SE Q Introduction Please make sure you familiarise your- self fully with the way the device works before you use it for the first time and that you understand how to handle electrical pow-er tools correctly. To help you do this please read the accompanyin...

Page 6 - Introduction / General safety advice for electrical power tools; Included items; Noise and vibration data:; General safety advice for; read all the safety advice; Workplace safety

7 GB/IE/CY Introduction / General safety advice for electrical power tools Q Included items Check that all the items and accessories are present immediately after unpacking the device: 1 Belt sander PEBS 900 SE1 Sanding belt1 Dust collection box1 Extraction adapter (for external vacuum dust extracti...

Page 7 - General safety advice for electrical power tools; Electrical safety; To avoid danger to life from; Careful handling and use of

8 GB/IE/CY General safety advice for electrical power tools 2. Electrical safety To avoid danger to life from electric shock: a) The mains plug on the device must match the mains socket. The plug must not be modified in any way. Do not use an adapter plug with devices fitted with a protective earth....

Page 8 - Keep cutting tools clean and sharp.; Safety advice for

9 GB/IE/CY General safety advice for electrical power tools b) Do not use an electrical power tool if its switch is defective. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. c) Pull the mains plug from the socket before you make any adjustments ...

Page 9 - adjusting the sanding belt:; advice on use; Light sanding pressure is enough:; Vacuum dust extraction

10 GB/IE/CY General safety advice for electrical power tools / Preparing for use J Switch the device off and allow it to come to a complete standstill before you put it down. J When taking a break from your work, before carrying out any tasks on the device itself (e.g. changing the sanding belt) and...

Page 10 - Preparing for use / Operation; Operation

11 GB/IE/CY Preparing for use / Operation Emptying the dust collection box: j Pull the dust collection box 10 off the dust extraction spout 5 . Open the dust collection box 10 and empty it. Dust extraction using external vacuum extraction: WarNING! If there is an explosive mixture of dust and air yo...

Page 11 - Sanding varnish; Using the sander in

12 GB/IE/CY Operation Material / type of work removing paint / varnish Coarse finish (Grit grade) 60 Fine finish (Grit grade) ––Preselected rotation speed high (5-6) Material / type of work Sanding varnish Coarse finish (Grit grade) 150 Fine finish (Grit grade) 320Preselected rotation speed low (1-2...

Page 12 - Maintenance and cleaning / Service centre / Warranty / Disposal; Maintenance and cleaning; If the plug or mains; Warranty; IE; Disposal

13 GB/IE/CY Maintenance and cleaning / Service centre / Warranty / Disposal Q Maintenance and cleaning WarNING! rISK OF INjUry! Before you carry out any work on the belt sander always pull the mains plug out of the mains socket. The belt sander is designed to be maintenance-free. j Clean the device ...

Page 13 - Declaration of conformity / Producer; Declaration of conformity /

14 GB/IE/CY Declaration of conformity / Producer Q Declaration of conformity / Producer We, Kompernaß GmbH, Burgstr. 21, D-44867 Bochum, Germany, hereby declare that this product complies with the following EU directives: Machinery Directive (98 / 37 / EC) EU Low Voltage Directive (2006 / 95 / EC): ...

Parkside PEBS 900 SE - Manual

Table of Contents:

Summary

Other Parkside Models