Parkside PSBM 850 - Manuals

Page 5 - Table of content

5 GB/IE/CY Introduction Proper use .....................................................................................................................Page 6Features and equipment ...............................................................................................Page 6Included items ......

Page 6 - Introduction

6 GB/IE/CY 2-speed hammer-action drill PSBM 850 Q Introduction Please make sure you familiarise yourself fully with the way the device works before you use it for the first time and that you understand how to handle electrical power tools correctly. To help you do this please read the accom-panying ...

Page 7 - Noise and vibration data:

7 GB/IE/CY 5 Rotation direction switch 6 Gear selector switch 7 Auxiliary handle 8 Quick-release chuck 9 Depth stop Q Included items 1 Hammer-action drill PSBM 8501 Auxiliary handle1 Depth stop1 Carry case1 Operating instructions1 „Warranty and service“ booklet Q Technical data Nom. voltage: 230 V ~...

Page 8 - General safety advice for electrical power tools; General safety advice for; read all the safety advice; Workplace safety; To avoid danger to life from

8 GB/IE/CY General safety advice for electrical power tools General safety advice for electrical power tools WarNING! read all the safety advice and instructions! Failure to observe the safety advice and instructions may result in electric shock, fire and / or serious injury. KEEP ALL THE SAFETY ADV...

Page 9 - Wear suitable clothing. Do not wear; Careful handling and use of; Keep cutting tools clean and sharp.; Safety advice for

9 GB/IE/CY carry it. Accidents can happen if you carry the device with your finger on the ON / OFF switch or with the device switched on. d) remove any setting tools or spanners before you switch the device on. A tool or spanner left attached to a rotating part of a device can lead to injury. e) avo...

Page 10 - Ensure that you do not strike; Before first use

10 GB/IE/CY Always make sure that nobody is placed in any danger and that there are no inflammable materials near the working area. WarNING! HaZarDOUS DUSTS! Working with harmful / poisonous dusts presents a danger to health for the tool operator and any persons in the vicinity. Wear safety glasses ...

Page 11 - First use; To switch on intermittent operation mode:; Before first use / First use

11 GB/IE/CY drill chuck 8 you can use the tool. The spindle lock releases automatically when the motor starts. Q First use The mains voltage at the mains socket must match that shown on the rating plate on the device. Devic-es marked with 230 V can also be operated at 220 V. Q Switching on and off W...

Page 12 - Have your device repaired

12 GB/IE/CY Drilling: j Set the drill / hammer-action switch 1 to the right into the position. Impact drilling: j Set the drill / hammer-action switch 1 to the left into the position. Note: The hammer-action drilling mode is intend- ed for drilling into brick, concrete and stone only. Q Screwdriving...

Page 13 - Information; Declaration of conformity /

13 GB/IE/CY Information Q Declaration of conformity / Producer We, Kompernaß GmbH, Burgstr. 21, 44867 Bochum, Germany, hereby declare that this product complies with the following EU directives: Machinery Directive(98 / 37 / EC) EU Low Voltage Directive(2006 / 95 / EC) Electromagnetic Compatibility ...