Parkside PDKS 120 - Manuals

Page 5 - Table of contents

5 GB/IE/CY Table of contents Introduction Intended purpose ..........................................................................................................Page 6Features and equipment ...............................................................................................Page 6Inclu...

Page 6 - Introduction

6 GB/IE/CY Scroll saw PDKS 120 Q Introduction Before you use it for the first time, it is es- sential that you make yourself fully familiar with the functions of the appliance and find out how to correctly handle electrically powered tools. To do this, read the following operating in-structions care...

Page 7 - Keep other people at a safe distance.; Introduction / Safety advice

7 GB/IE/CY 2 x Guide plates 2 x Screws10 x Saw blades 1 x Dust blow tube 3 x Threaded feet with nut, washer and retaining ring 1 x Allen key 1 x Operating instructions Q Technical data Nominal voltage: 230 V ~ 50 Hz Rated power: 120 W Short-term operation time: 20 min (S2)Stroke rate (no load): n 0 ...

Page 8 - Secure the workpiece.; Look after your tools carefully.; Safety advice relating; Safety advice

8 GB/IE/CY J Where there are connection points provided for vacuum dust extraction please use them, and ensure they are working properly. 11. Do not use the mains lead for purposes for which it was not intended. J Do not use the mains lead to pull the plug out of the mains socket. Protect the mains ...

Page 9 - Safety advice / Assembly

9 GB/IE/CY suitably qualified person or at the Customer Service Centre. J Always work with the mains lead leading away from the rear of the device. J If a dangerous situation arises, pull the mains plug immediately out of the mains socket. J Always switch on the electrical power tool before moving t...

Page 10 - Bringing into use; Setting up the device:; Assembly / Bringing into use

10 GB/IE/CY Q Attaching the feet 12 (see Fig. B) j Attach the feet 12 from below through the mounting holes in the device‘s base plate. j Place the plain washers and then the nuts on to the screw threads. j Tighten the nuts using a size 10 open spanner. Q Attaching the dust blow tube 1 (see Fig. C) ...

Page 11 - Removing the saw blade; Maintenance and cleaning; Have your device; Warranty; Bringing into use / Maintenance and cleaning / Service / Warranty

11 GB/IE/CY j Lower the clamping lever 13 to tension the saw blade 7 . j Turn the clamping lever 13 horizontally clock- wise to increase the tension. j Turn the clamping lever 13 horizontally anti- clockwise to reduce the tension. NOTE: Sawing with too little tension in the saw blade 7 can lead to i...

Page 12 - IE; Disposal; Conformity Declaration /

12 GB/IE/CY IE Kompernaß Service IrelandTel.: 1850 930 412 (0,082 €/Min.) * Standard call rates apply. Mobile operators may vary. e-mail: [email protected] Q Disposal The packaging is wholly composed of environmentally-friendly materials that can be disposed of at a local recycling centre. D...