Parkside PLBS 30 A1 - Manual

Page 5 - Table of contents

5 GB/IE Introduction Proper use ...............................................................................Page 7Features and equipment .........................................................Page 8Included items .........................................................................Page 8Tec...

Page 6 - Introduction; Read instruction manual!

6 GB/IE Introduction The following pictograms are used in these operating instructions / on the device: Read instruction manual! Observe caution and safety notes! Caution – electric shock! Danger to life! Risk of explosion! Risk of ﬁre! Warning - Hot surfaces! V~ Volt (AC) W Watts (Eﬀective power) W...

Page 7 - Fine soldering iron set PLBS 30 A1; Please make sure you familiarise yourself fully with the way; Proper use

7 GB/IE Introduction Fine soldering iron set PLBS 30 A1 Introduction Please make sure you familiarise yourself fully with the way the device works before you use it for the ﬁrst time and that you understand how to handle it correctly. Please read the operating instructions below. Be careful to keep ...

Page 8 - Features and equipment

8 GB/IE Introduction Features and equipment 1 Soldering pencil 2 Soldering tip 3 Helical spring 4 Clips 5 Third hand 6 Holder for copper attachments 7 Multifunctional holder 8 Soldering sponge 9 Universal attachment 10 Pointed attachment 11 Conical attachment Included items 1 Fine soldering iron set...

Page 9 - Safety advice; Keep your working area clean and well lit.; Electrical safety; To avoid danger to life from electric shock:

9 GB/IE Safety advice Safety advice CAUTION! Failure to observe the instructions and advice given below may result in electric shock, ﬁre and/or serious injury. 1. Workplace safety a) Keep your working area clean and well lit. Untidy or poorly lit working areas can lead to accidents. b) Do not work ...

Page 12 - Always wash your hands immediately after soldering .; Careful handling and use; Electrical

12 GB/IE Safety advice Do not eat, drink or smoke in rooms where soldering is carried out. Otherwise your hands may transfer any adhering traces of lead via food or cigarettes into your body. Always wash your hands immediately after soldering . Do not dispose of soldering waste with the household ru...

Page 13 - Safety advice / Before first use; Original accessories / attachments

13 GB/IE Safety advice / Before first use Original accessories / attachments Use only the accessories detailed in the operating instructions. The use of attachments or accessories other than those recommended here could lead to you suﬀering an injury. Before ﬁrst use Fitting the helical spring Inser...

Page 14 - Operation

14 GB/IE Operation Operation Switching on and oﬀ Switching on: Insert the mains plug into a suitable mains socket. Switching off: Pull the plug out of the mains socket to switch oﬀ the device. Third hand CAUTION! DANGER OF BURNS! The clips on the third hand 5 can become hot while you are soldering t...

Page 15 - Soldering

15 GB/IE Operation Soldering — The soldering pencil has a rated output of 30 watts and is there- fore ideal for electronics soldering. — The design of the soldering pencil makes it especially suitable for use where access is diﬃcult or for ﬁne soldering work. — To achieve the best results use electr...

Page 16 - Operation / Maintenance and cleaning; Universal attachment; Maintenance and cleaning

16 GB/IE Operation / Maintenance and cleaning You can fashion and decorate various materials with your soldering pencil. Remove the parts of the surface or engrave design elements into it (see Fig. D).You can carry out these decorations in, for example, wood, leather, paper, papier mâché, smooth fab...

Page 17 - Service centre / Warranty; Service centre; Have your device repaired only by; Warranty

17 GB/IE Service centre / Warranty Service centre Have your device repaired only by qualified specialist personnel using original manu -facturer parts only. This will ensure that your device remains safe to use. If the plug or mains lead needs to be replaced, always have the replacement carried out ...

Page 18 - Disposal; The packaging is wholly composed of environmentally-friendly

18 GB/IE Warranty / Disposal The warranty period will not be extended by repairs made unter warranty. This applies also to replaced and repaired parts. Any damage and de-fects extant on purchase must be reported immediately after unpacking the appliance, at the latest, two days after the purchase da...

Page 19 - Disposal / Declaration of Conformity / Manufacturer; Declaration of Conformity / Manufacturer; Applicable harmonized standards

19 GB/IE Disposal / Declaration of Conformity / Manufacturer Contact your local refuse disposal authority for more details of how to dispose of your worn-out devices. Declaration of Conformity / Manufacturer We, Kompernaß GmbH, the person responsible for documents: Mr Felix Becker, Burgstr. 21, D-44...

Parkside PLBS 30 A1 - Manual

Table of Contents:

Summary

Other Parkside Models