Msd 50922 Ford High Speed DynaForce Starter BB 351M, 4- User Manual
Msd 50922 Ford High Speed DynaForce Starter BB 351M, 4– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Figure 4 Wiring the DynaForce High Speed Starter.; • If there is not enough clearance, you will need to install; Figure 2 Checking Pinion Clearance.
- Page 3 – INSTALLATION INFO; INSPECT PINION GEAR; Figure 5 Wiring to Incorporate an External Solenoid.; Figure 6 Pinion Gear Pattern.
- Page 4 – TECH NOTES; Limited Warranty; or consequential damages.; Service; When returning MSD components for warranty service,; Proof of Purchase must be supplied for verification. After; All returns must have a Return Material Authorization (RMA) number; issued to them before; M S D
MSD DynaForce High Speed Starter
Ford V8, 351C/M, 400, 429, 460, PN 50922
WARNING: Before installing the DynaForce Starter disconnect the battery cables. When disconnecting
the battery cables, always remove the Negative (-) cable first and install it last.
IMPORTANT: Proper installation of the DynaForce Starter is important to the overall operation. Correct alignment
of the starter pinion with the ring gear is needed to achieve the best operation and longevity from
your starter. Please read the instructions before attempting the installation.
M S D
• W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4
ONLINE PRODUCT REGISTRATION: Register your MSD product online. Registering your product will help
if there is ever a warranty issue with your product and helps the MSD R&D team create new products that
you ask for! Go to www.msdperformance.com/registration.
Figure 1 Clocking the Starter for Clearance.
CLOCKING
LOCATIONS
Thank you for purchasing the DynaForce High Speed Starter from MSD. Thanks to special gearing
and other design features, the High Speed starter spins 25% faster than our traditional DynaForce
starters. This extra speed is ideal for engines with magnetos or blown alcohol. Please be sure to read,
understand, and follow the instructions prior to installation so that everything goes smoothly and the
engine starts reliably time after time.
INSTALLATION
1. Make sure the starter mounting flange on the mid plate is clean and smooth.
2. Before mounting the starter, measure the distance from the front of the ring gear (engine side) to
the starter mounting surface. It should be 5/8" - 11/16" (Figure 2).
• If there is not enough clearance, you will need to install the supplied shim kit by removing the
mounting block (Figure 3). Place the small shim ring in the bearing bore and install the outer
shim on the support housing. Reinstall the mounting block. This will move the pinion gear into
the starter approximately 0.060".
3. Check that the position of the solenoid is away from direct heat sources and other components.
If there are clearance problems, the starter housing can be rotated to move the location of the
solenoid. This is done by removing the three bolts on the mounting block and repositioning the
starter motor (Figure 1).
Parts Included:
1 - Starter
1 - Shim Ring
1 - Outer Shim
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 INSTALLATION INSTRUCTIONS M S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4 Figure 4 Wiring the DynaForce High Speed Starter. BATTERY + - LENGTH 3’ 5’ 7’ 10’ +10’ AWG 4 2 1 0 00 CABLE LENGTH VS. GAUGE 12-GAUGE MINIMU...
INSTALLATION INSTRUCTIONS 3 M S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4 INSTALLATION INFO INSPECT PINION GEAR After cranking the engine several times, you can inspect the witness pattern on the pinion gear. The p...
TECH NOTES _________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________ _____________________________________________...
