Msd 8987 Start and Step Timing Control Installation- User Manual
Msd 8987 Start and Step Timing Control Installation– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Figure 2 Wiring the Control with an MSD 6 Series Ignition Control.; MOUNTING; Retard activation wire. Activated when connected to 12 volts.
- Page 3 – Figure 3 Wiring the Control with an MSD 7 Series Ignition Control.; TECH NOTES
- Page 4 – Limited Warranty; or consequential damages.; Service; When returning MSD components for warranty service,; Proof of Purchase must be supplied for verification. After; All returns must have a Return Material Authorization (RMA) number; issued to them before; M S D
Figure 1
Parts Included:
1 – Control
4 – Mounting Screws
WARNING: During installation, disconnect the battery cables. When disconnecting the
battery, always remove the negative cable first and install it last.
Note: Must be used with an MSD Ignition.
OPERATION
The Start and Step Retard provides two retard
features; a start retard and a step retard. The
Control can be connected to distributors using
a magnetic pickup, amplifier or breaker point. It
is recommended that the centrifugal advance
of the distributor be locked-out. The amount
of retard is selected with the two rotary dials
(Figure 1).
Start Retard: The Start Retard is adjusted with the
rotary dial on the left. It is adjustable in 5° increments
for 4, 6 or 8-cylinder engines from 0°-20° The
number of cylinders must be selected, even when
no start retard will be used. Simply rotate to dial to
the desired position.
The Start Retard is activated as soon as the engine
begins to crank. Between 400 and 600 rpm, the
timing begins to ramp back to zero retard (your total
timing setting). The start retard will not activate again until the engine rpm drops to 400 rpm (the timing will
also ramp on again between 600-400 rpm).
Step Retard: The Step Retard is adjusted with the dial on the right. The retard is adjustable from 0°-
15° in one degree increments. The Step Retard is activated by the Pink wire. When the Pink wire is
connected to 12 volts, the retard is activated. The most common application is to splice the Pink wire
into the activation trigger wire of a nitrous system. That way, the retard is activated with the nitrous.
The Controller also has a very accurate magnetic pickup compensation circuit built-in and will hold
the timing steady throughout the entire rpm range of the engine. This is why there will be a 4° change
in the engine timing when the Control is installed.
Important: After installation the engine’s mechanical timing must be checked and reset.
6-CYLINDER
ENGINE
4-CYLINDER
ENGINE
ZERO
STEP RETARD
8-CYLINDER
ENGINE
M S D
• W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4
ONLINE PRODUCT REGISTRATION: Register your MSD product online and you’ll be entered
in our monthly 8.5mm Super Conductor Spark Plug Wire give-away! Registering your product
will help if there is ever a warranty issue with your product and helps the MSD R&D team create
new products that you ask for! Go to www.msdperformance.com/registration.
Start and Step Retard Control
PN 8987
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 INSTALLATION INSTRUCTIONS M S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4 Figure 2 Wiring the Control with an MSD 6 Series Ignition Control. MAG PICKUP (NOT USED) POINTS DISTRIBUTOR WHITE WHITE STEP RETARD PINK ORA...
INSTALLATION INSTRUCTIONS 3 M S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4 POINTS DISTRIBUTOR ORANG E BLACK WHITE WHITE STEP RETARD PINK (NOT USED) RED RED RED Figure 3 Wiring the Control with an MSD 7 Series Igniti...
Limited Warranty M SD warrants this product to be free from defects in material and workmanship under its intended normal use*, when properly installed and purchased from an authorized MSD dealer, for a period of one year from the date of the original purchase. This warranty is void for any products...
