Msd 50901 DynaForce Starter Ford SB V8, 3_8th depth In- User Manual
Msd 50901 DynaForce Starter Ford SB V8, 3_8th depth In– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLATION; • If there is not enough clearance; Figure 3 Installing the Pinion Shim Spacers.
- Page 3 – Figure 4 Wiring the Starter.; INSTALLATION INFO; INSPECT PINION GEAR; After cranking the engine several times, you can inspect; SLOW CRANKING; The most common cause is due to low input voltage. The; Figure 5 Wiring to Incorporate Factory Solenoid.; Figure 6 Pinion Gear Pattern.
- Page 4 – Limited Warranty; or consequential damages.; Service; When returning MSD components for warranty service,; Proof of Purchase; must be supplied for verification. After; M S D; DISCONNECT SWITCHES; exceeds your starting and electrical system requirements.
MSD DynaForce Starter
FORD 289, 302, 351W
3/4" Depth, PN 5090, 3/8" Depth, PN 50901
Parts Included:
1 - Starter
1 - Shim Ring
1 - Outer Shim
WARNING:
Before installing the DynaForce Starter disconnect the battery cables. When disconnecting
the battery cables, always remove the Negative (-) cable first and install it last.
IMPORTANT:
Proper installation of the DynaForce Starter is important to the overall operation. Correct alignment
of the starter pinion with the ring gear is needed to achieve the best operation and longevity from
your starter. Please read the instructions before attempting the installation.
When selecting a starter for your Ford, our research has found that year, model and drivetrain
combination do not always dictate the correct starter. There are variations between the 164 tooth and
157 tooth flywheels and well as the inside diameter of the starter block plate (4.130” or 4.084”). MSD
offers two starters for the 289/302 and 351W engines; one with a 3/8th depth ring gear, one with a
¾” depth. Figure 1 shows the differences and applications.
M S D
• W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4
ONLINE PRODUCT REGISTRATION: Register your MSD product online and you’ll be entered in our
monthly 8.5mm Super Conductor Spark Plug Wire give-away! Registering your product will help if there
is ever a warranty issue with your product and helps the MSD R&D team create new products that you
ask for! Go to www.msdperformance.com/registration.
When using OEM bell housings, it must be paired with the corresponding flywheel and ring gear.
Many aftermarket bellhousings feature a punch out to allow both to be used.
ENGINE BLOCK PLATE
ENGINE BLOCK PLATE
TRANSMISSION
USE
PN 5090
USE
PN 50901
3/4”
3/8”
RING GEAR TEETH
TRANSMISSION
STARTER REGISTRY DIAMETER
DEPTH
STARTER
164
4-speed
4.130"
3/8"
PN 50901
164
Automatic
4.084"
3/4"
PN 5090
157
4-speed and Auto
4.084"
3/4"
PN 5090
Note that these are generally the applications, however there are variables.
Figure 1 Ring Gear Depth and Bell Housing/Engine Block Identification.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 INSTALLATION INSTRUCTIONS M S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4 INSTALLATION 1. Make sure the starter mounting flange on the mid plate is clean and smooth. 2. Before mounting the starter, measure the dist...
INSTALLATION INSTRUCTIONS 3 M S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4 Figure 4 Wiring the Starter. BATTERY + - LENGTH 3’ 5’ 7’ 10’ +10’ AWG 4 2 1 0 00 CABLE LENGTH VS. GAUGE 12-GAUGE MINIMUM TO IGNITION SWITCH ...
Limited Warranty M SD warrants this product to be free from defects in material and workmanship under its intended normal use*, when properly installed and purchased from an authorized MSD dealer, for a period of one year from the date of the original purchase. This warranty is void for any products...
