Msd 32079 Red Super Conductor Gen III LS-1_6 V8, Unive- User Manual
Msd 32079 Red Super Conductor Gen III LS-1_6 V8, Unive– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Figure 3 Stripping the Sleeve.
- Page 3 – position of the conductor to make sure the crimp is solid and firm.; TECH NOTES; Figure 7 Boot & Installation and Terminal Depth.
- Page 4 – Limited Warranty; or consequential damages.; Service; When returning MSD components for warranty service,; Proof of Purchase; must be supplied for verification. After; M S D
Parts Included In This Kit:
8 - Spark Plug Wires with 90° and Multi-Angle Boots
9 - LS1 Boots and Terminals
1 - Mini-Stripper-Crimper
9 - Terminal Insert Guides
Universal Wire Set for GM
GEN III Engines
PN 32079 / PN 32073
This Universal Wire set gives you the choice of using a 90° or straight/Multi-Angle boot and
terminal on the spark plug to accommodate for the header variances. Once you have determined
the style boots to use, you can cut the new wires to length then install the correct supplied coil
terminal and boot. A Mini-Stripper-Crimper Tool is supplied to help you achieve a strong, factory
type crimp.
Figure 1 Choosing the Spark Plug Boots and Terminals.
Figure 2 Stripping the Sleeve.
Tools Required:
Razor Blade
Vise (4" Minimum)
Needlenose Pliers
Optional:
PN 35051 Pro Crimp Tool
1. Once you’ve determined wire length and spark plug
boot to use, position the wire in the corresponding strip
guide of the strip tool.
2. There are two stripping positions on the stripping slot,
when installing the LS1 terminal it will require you to strip
the wire at standard terminal length (Figure 2).
3. Remove the wire and twist the cut sleeve off in a coun-
terclockwise direction.
M S D
• W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 INSTALLATION INSTRUCTIONS M S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4 Figure 3 Stripping the Sleeve. Figure 4 Preparing the Terminals. 4. To achieve the strongest crimp possible, it is required to bend the crim...
INSTALLATION INSTRUCTIONS 3 M S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4 10. Back off the vise and remove the wire from the Crimper. Gently tug the terminal and inspect the position of the conductor to make sure t...
Limited Warranty M SD warrants this product to be free from defects in material and workmanship under its intended normal use*, when properly installed and purchased from an authorized MSD dealer, for a period of one year from the date of the original purchase. This warranty is void for any products...
