Msd 39849 Wire Set, GM 2001, Truck, 8.1L w_HG Installa- User Manual
Msd 39849 Wire Set, GM 2001, Truck, 8.1L w_HG Installa– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Wire Set Super Conductor
GM 2001-2005 Truck 8.1L V8 w/Heat Guard
PN 39849 (Red) and PN 39843 (Black)
MSD IGNITION
• 1490 HENRY BRENNAN DR., EL PASO, TEXAS 79936 • (915) 857-5200 • FAX (915) 857-3344
© 2005 Autotronic Controls Corporation
FRM27161
Created 12/05
Printed In U.S.A.
Note:
To achieve the correct fit it’s recommended that the Multi-Angle boot be bent to
45° as shown in Figure 1.
Note:
You will also notice that there are two wires that measure 13” and also six wires
which measure 15”. The two shorter wires are intended to be used on cylinders
#5 and #7 (Driver’s rear two cylinders).
8.5MM RED OR BLACK SPARK PLUG WIRE
MULTI-ANGLE BOOT
45
°
BEND
SP ARK PLUG
WIRE
LS1 COIL BOOT
Figure 1
Wire Set Super Conductor
GM 2001-2005 Truck 8.1L V8 w/Heat Guard
PN 39849 (Red) and PN 39843 (Black)
MSD IGNITION
• 1490 HENRY BRENNAN DR., EL PASO, TEXAS 79936 • (915) 857-5200 • FAX (915) 857-3344
© 2005 Autotronic Controls Corporation
FRM27161
Created 12/05
Printed In U.S.A.
Note:
To achieve the correct fit it’s recommended that the Multi-Angle boot be bent to
45° as shown in Figure 1.
Note:
You will also notice that there are two wires that measure 13” and also six wires
which measure 15”. The two shorter wires are intended to be used on cylinders
#5 and #7 (Driver’s rear two cylinders).
8.5MM RED OR BLACK SPARK PLUG WIRE
MULTI-ANGLE BOOT
45
°
BEND
SP ARK PLUG
WIRE
LS1 COIL BOOT
Figure 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
