Makita DF347DWLE - User Manual
Makita DF347DWLE Impact Driver – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Explanation of general view
- Page 4 – SAVE THESE INSTRUCTIONS.; Tips for maintaining maximum battery life; FUNCTIONAL DESCRIPTION; Battery protection system
- Page 5 – Drilling operation; MAINTENANCE
- Page 7 – Verklaring van het onderdelenoverzicht
- Page 8 – Accubeveiligingssysteem
- Page 9 – Gebruik als boormachine
- Page 11 – Makita Corporation
GB Cordless Driver Drill
Instruction manual
F
Perceuse-Visseuse sans Fil
Manuel d’instructions
D
Akku-Bohrschrauber
Betriebsanleitung
I
Trapano avvitatore a batteria Istruzioni per l’uso
NL Accuschroef-boormachine
Gebruiksaanwijzing
E
Atornillador Taladro
Manual de instrucciones
Inalámbrico
P
Furadeira/ Parafusadeira a
Manual de instruções
Bateria
DK Akku bore-skruemaskine
Brugsanvisning
GR
Δραπανοκατσάβιδο
μπαταρίας
Οδηγίες
χρήσης
DF347D
DF457D
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 ENGLISH (Original instructions) Explanation of general view SPECIFICATIONS • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. • Specifications and battery cartridge may differ from country to country.• Weight, with battery...
4 5. Do not short the battery cartridge: (1) Do not touch the terminals with any conductive material. (2) Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc. (3) Do not expose battery cartridge to water or rain. A battery short can cause a large current...
5 pointer, and maximum when the marking is aligned with the pointer.The clutch will slip at various torque levels when set at the number 1 to 16. The clutch is designed not to slip at the marking.Before actual operation, drive a trial screw into your material or a piece of duplicate material to dete...
