Makita 4191DWA - User Manual

Page 2 - SPECIFICATIONS; GENERAL SAFETY RULES; Read and understand all instructions.; Failure to follow all; SAVE THESE INSTRUCTIONS; Work Area; Electrical Safety

2 SPECIFICATIONS • Manufacturer reserves the right to change specifications without notice. • Specifications may differ from country to country. GENERAL SAFETY RULES USA003-1 (FOR All BATTERY OPERATED TOOLS) WARNING: Read and understand all instructions. Failure to follow all instructions listed bel...

Page 4 - SPECIFIC SAFETY RULES

4 22. When servicing a tool, use only identicalreplacement parts. Follow instructions inthe Maintenance section of this manual. Use of unauthorized parts or failure to followMaintenance instructions may create a risk ofshock or injury. SPECIFIC SAFETY RULES USB070-1 DO NOT let comfort or familiarity...

Page 7 - Tips for maintaining maximum battery life

7 8. Do not incinerate the battery cartridgeeven if it is severely damaged or is com- pletely worn out. The battery cartridge canexplode in a fire. 9. Be careful not to drop or strike battery. SAVE THESE INSTRUCTIONS Tips for maintaining maximum battery life 1. Charge the battery cartridge before co...

Page 9 - ASSEMBLY

9 Bevel cutting Loosen the clamping screw on the bevel scale plate on thefront of the base. Set for the desired angle (0° - 45° ) by tiltingaccordingly, then tighten the clamping screw securely. Sighting For straight cuts, align the A position on the front of the basewith your cutting line. For 45° ...

Page 11 - Water supply; OPERATION

11 Attach the tank holder onto the motor housing. Tighten thescrew (B) securely. Connect the cap on the end of the polyvinyl tube to themouth of the tank. Turn the tank clockwise when making theconnection. Then tighten the screw (A) securely to securethe tank. CAUTION: • If you find the polyvinyl tu...

Page 12 - MAINTENANCE; After use

12 min (11-13/16”/min).) Also slow down as you complete a cutto avoid breaking or cracking the workpiece being cut. CAUTION: • Be sure to hold the workpiece firmly down on a stablebench or table during operation. • Do not twist or force the tool in the cut, or the motor maybe overloaded or the workp...

Page 13 - Recycling the Battery; ACCESSORIES

13 Recycling the Battery The only way to dispose of a Makita battery is to recycle it.The law prohibits any other method of disposal. To recycle the battery: 1. Remove the battery from the tool. 2. a) Take the battery to your nearest Makita Factory Ser-vice Center or b) Take the battery to your near...

Page 14 - Memo

Page 18 - Your answers to the following questions are appreciated.; Certificate of Warranty

18 Your answers to the following questions are appreciated. Date Purchased Model No. Serial No. Initial Last Name Street Address City Province AGE: Male Female Married Single Month Day Year 20 Under 19 20-29 30-39 40-49 Over 50 Paste Paste Paste Paste Paste Paste Paste Paste P aste P aste P aste P a...

Page 19 - Factory Service Centres; CUSTOMER RECORD

19 Factory Service Centres For the authorized service centre nearest you please refer to the local yellow pages directory under “tools” or con-tact our customer service department (Tel) 1-800-263-3734 When you need service... • Explain the problem in a letter • Enclose the letter with the tool • Pac...

Page 20 - Warranty Policy; MAKITA LIMITED ONE YEAR WARRANTY; Makita Corporation of America

Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects fromworkmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop duringthis one year period, return the COMPLE...

Makita 4191DWA - User Manual

Table of Contents:

Other Manuals for Makita 4191DWA

Summary

Other Makita Circular Saws Models